ACI Certification Concrete Field Testing Technician Grade 1 Sample Written Test Exam 2024

ACI Certification Concrete Field Testing Technician Grade 1 Sample Written Test Exam 2024 The Method of determining air content of concrete containing lightweight aggregate is the pressure method. True or False? - CORRECT ANSWER-False When making a test cylinder from concrete being used in construction, the field technician must also measure the slump of the concrete. True or False? - CORRECT ANSWER-True While the technician is checking the slump of the concrete, there is a decided falling away or shearing off of concrete from one side of the sample. What should the technician do? - CORRECT ANSWER-Disregard the test and retest on another portion of the sample Preparation of specimens for transport includes - CORRECT ANSWER-Determining that at least 8 hours has elapsed since the final set If the aggregate correction factor for a given source of fine and coarse aggregate is found to be .2% in a pressure air meter, and an air content value of 5.0% is read on the gage of the same air meter containing concrete with the same aggregate, what is the correct air content in %. - CORRECT ANSWER-4.8% = 5.0 - 0.2 Strength test specimens transported from the field to the testing laboratory must be - CORRECT ANSWER-Protected from jarring, moisture loss, and freezing. Test for slump and air content must be started within __ after obtaining the final portion of the composite sample. - CORRECT ANSWER-5 mins The minimum size for samples to be used for strength tests is __. - CORRECT ANSWER-1 ft^3 = 28 L After strike off of the measure used to determine densit