Technical Rescue I Rope Rescue test with Verified Solutions 2024

Technical Rescue I Rope Rescue test with Verified Solutions 2024 NFPA ____ is the Standard for Technical Rescuer Professional Qualification - Answer -NFPA 1006 NFPA _____ is the Standard on Operations and Training for Technical Search and Rescue Incidents - Answer -NFPA 1670 NFPA _____, Standard on Life Safety Rope and Equipment for Emergency Services defines testing requirements, labeling directions, and certification procedures for rope rescue requirements - Answer - NFPA 1983 Breaking strength is known as ______ strength - Answer -Tensile The most common type of rope used in rope rescue is ________ - Answer -Kernmantle The ______ is the inner core of the rope, the strongest portion, and is usually __ percent of the tensile strength - Answer -Kern, 75% The _______, which protects the kern, and makes up the rest of rope strength - Answer -Mantle Kernmantle rope can be either ______ or _______ - Answer -Static or Dynamic _____ rope absorbs shock forces faster than _____ rope - Answer -Static, dynamic Some dynamic ropes can stretch up to __ percent before breaking - Answer -60 percent Dynamic rope is used where fall factors are over .__ are expected - Answer -.25 NFPA _____ defines life safety rope as "rope dedicated to support people during rescue, fire fighting, other emergency operations, and during training." - Answer -NFPA 1983 One k/N=___.__ lbs - Answer -224.8 lbs NFPA 1983 defines a one person load as _.__ k/N - Answer -1.33 k/N NFPA 1983 defines a two person load as _.__ k/N - Answer -2.67 k/N _____ _____ rope is used for a one-person load - Answer -Light use The minimum breaking strength for light use rope is __ k/N, and it must have a diameter