NFPA 1006 Level 1 Study Questions || with 100% Verified Solutions.

What is the suggested minimum number of separate anchor points required to assure a safe and redundant rope rescue system? correct answers Two A multipoint anchor system is preferred when the ____ of the load will be changing. correct answers Direction When utilizing two anchor points at an angle of 90 degrees with a 100lb/45kg load, what is the amount of weight on each anchor point? correct answers 70lb/32kg Ideally, the angle between the legs of an anchor system should not be more than ____ and never more than ____. correct answers 90 degrees , 120 degrees What is calculated by dividing the distance a load falls by the length of the rope? correct answers Fall Factor At what interior angle within an anchor system does the load equal 100% on each leg of the anchor? correct answers 120 Degrees What is the first task when a Prusiks is locked onto a rope? correct answers Inspect the hitch to make certain it is tied correctly What is one function of a load-releasing hitch? correct answers Freeing of jammed Prusiks In a single change of direction force vector, the most force generated at the point of angle is ____ the load. correct answers 2 Times In a change of direction, the ____ an angle created by the force vector, the ____ force added to the system. correct answers Wider, Less What is the term used when a second anchor is placed in line with an anchor that multiplies the strength of the anchor system? correct answers Tie Back/ Back Tie During system operation, the responsibility of safety is continuously evaluated by? correct answers Safety Officer In a shared anchor system, the ____ the angle created by the force vector, the ____ the force is on the anchors. correct answers Narrower, Less In a rope system, the Actual Mechanical Advantage (AMA) is calculated by determining the theoretical mechanical advantage and ____. correct answers Subtracting the effects of friction