Exam (elaborations)
NIMS CNC Operator Test Study Guide
- Course
- Institution
NIMS CNC Operator Test Study Guide
[Show more]
Seller
Follow
denicetho
Content preview
NIMS CNC Operator Test Study Guide+X - correct answer-A jog key that moves the spindle along the X-axis in the positive
direction.
minus (-)X - correct answer-A jog key that moves the spindle along the X-axis in the negative
direction.
+Y - correct answer-A jog key that moves the spindle along the Y-axis in the positive
direction.
minus (-)Y - correct answer-A jog key that moves the spindle along the Y-axis in the negative
direction.
+Z - correct answer-A jog key that moves the spindle along the Z-axis in the positive
direction.
minus (-)Z - correct answer-A jog key that moves the spindle along the Z-axis in the negative
direction.
+A - correct answer-A jog key that rotates machine components around the A-axis in a
positive direction. Not all Haas mills are equipped with a fourth A-axis.
minus (-)A - correct answer-A jog key that rotates machine components around the A-axis in
a negative direction. Not all Haas mills are equipped with a fourth A-axis.
+B - correct answer-A jog key that rotates machine components around the B-axis in a
positive direction. Not all Haas mills are equipped with a fifth B-axis.
minus (-)B - correct answer-A jog key that rotates machine components around the B-axis in
a negative direction. Not all Haas mills are equipped with a fifth B-axis.
+10 FEEDRATE - correct answer-An override key on the Haas control that increases the
current feed rate in 10% increments.
minus (-)10 FEEDRATE - correct answer-An override key on the Haas control that
decreases the current feed rate in 10% increments.
100% FEEDRATE - correct answer-An override key on the Haas control that sets the feed
rate back to 100% of the programmed value.
+10 SPINDLE - correct answer-An override key on the Haas control that increases the
current spindle speed in 10% increments.
minus (-)10 SPINDLE - correct answer-An override key on the Haas control that decreases
the current spindle speed in 10% increments.
, 100% SPINDLE - correct answer-An override key on the Haas control that sets the spindle
back to 100% of the programmed value.
5% RAPID - correct answer-An override key on the Haas control that limits rapid traverse to
5% of maximum.
25% RAPID - correct answer-An override key on the Haas control that limits rapid traverse to
25% of maximum.
50% RAPID - correct answer-An override key on the Haas control that limits rapid traverse to
50% of maximum.
100% RAPID - correct answer-An override key on the Haas control that allows the machine
spindle to move at its maximum rate of travel.
Alarm 176 - correct answer-An alarm code on the Haas control that indicates the machine is
experiencing an overvoltage condition. Alarm 176 initiates auto-shutdown after 4.5 minutes.
Alarm 177 - correct answer-An alarm code on the Haas control that indicates the machine is
experiencing an overheating condition. Alarm 177 initiates auto-shutdown after 4.5 minutes.
ALARM/MESGS - correct answer-The display key on the Haas control that shows the
current alarms when pressed once and messages when pressed twice.
alpha keys - correct answer-The area of the control keypad that allows an operator to enter
letters and special characters into the control.
AUTO ALL AXES - correct answer-In zero return mode, the key that returns and initializes all
axes to machine zero.
Auto Power Off Timer - correct answer-Setting 1. A setting that indicates how many minutes
of idle time must lapse before the machine is automatically turned off.
AUX CLNT - correct answer-A jog key that turns on the Through Spindle Coolant system
when in MDI mode. Pressing this key again shuts off the system.
block delete - correct answer-A machine control that provides the option of skipping a
predetermined series of program blocks. A block delete allows the operator to run two
versions of the same program.
bracket - correct answer-[ ]. Punctuation marks used to separate CNC program commands
from user comments.
CANCEL - correct answer-A key on the Haas control that backspaces the cursor to delete
the last character entered or cancels any program block that is highlighted during a block
edit.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller denicetho. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.80. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
78310 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now