MLT#2
D - ANS-"""What is one of the ways to eliminate factors that lead to machine failure?
(Ref:1.5a)
A. Hire more mechanics
B. Focus on condition improvement and defect elimination.
C. Increase planned work.
D. Both B & C""
"
D - ANS-"""Where would one likely find a permanently installed machine condition
monitoring system? (Ref:1.100)
A. High speed machinery
B. Machines that degrade very quickly when they begin to degrade
C. Highly Critical, low speed, low load machine
D. All of the above
""
"
C - ANS-"Which of the following depends on operators and maintenance technicians to
work together to maintain long term productive capability of the machine? (Ref:no slide)
A. Run to Failure (RTF)
B. Planned Preventive Maintenance (PPM)
C. Planned Predictive Maintenance (PDM)
D. Reliability Centered Maintenance (RCM)
"
A - ANS-"Which of the following is not a Maintenance Strategy? (Ref:1.60)
A. Persuasive
B. Predictive
C. Proactive
D. Preventative
"
A - ANS-"Which of the following economic realities drove manufacturers initially toward
a need for more advanced maintenance management? (Ref:1.80)
A. Manufacturing labor shortages, which led to mechanization of processes
B. Development of the jet aircraft
C. Increasing consumer demand which led to increases in productivity requirements
,D. Growth of nuclear power generation industry
"
C - ANS-"According to E. Rabinowicz, MIT, to what extent are combined abrasive and
adhesive wear responsible for machine degradation (Ref:no slide)
""A. 15 Percent
B. 25 percent
C. 45 percent
D. 75 Percent""
"
D - ANS-"All machine component movement can be described as which of the
following? (Ref:2.30)
A. Surface friction
B. Surface contact
C. Fluid Friction
D. Sliding or rolling contact"
A - ANS-"EHL conditions occur primarily in (Ref:2.360)
A. Rolling bearings, gears and cams
B. Slow moving pins and bushings
C. Piston rings and liners
D. Journal bearings"
B - ANS-"If the oil was to approach a solid state under pressure, which of the following
would be true? (Ref:2.360)
A. Fluid friction would be eliminated
B. Higher fluid friction would be created
C. Lower fluid friction would be produced
D. All of the above"
C - ANS-"Tribology is the study of which 3 areas of knowledge? (Ref:2.210)
A. Chemical, mechanical, electrical
B. Surface finish, adhesion, wear
C. Friction, lubrication, wear
D. Design, construction, maintenance"
D - ANS-"Which is the stiffest grease classification? (Ref:3.380) A. 10W30
B. 220
C. 8EP
, D. 0"
C - ANS-"Where would a friction modifier additive be commonly used? (Ref:3.300)
A. Lightly loaded helical gear drive lubricant
B. Traction wheels in mag-lev trains
C. Automatic transmissions lubricants
D. Highly loaded helical gear drive lubricant"
D - ANS-"To which of the API groups will PAG synthetic base stocks belong?
(Ref:3.140)
A. G1
B. G2
C. G2+
D. G5"
C - ANS-"Additives represent what percentage of a finished lubricant? (Ref:3.350)
A. .1 to .3
B. .1 to 6
C. 1 to 30
D. 10 to 30"
C - ANS-"What is the expected useful temperature range for a PAO synthetic stock?
(Ref:3.150)
A. 50C to 150C
B. 0C to 100C
C. -50C to 150C
D. -50C to 50C"
D - ANS-"""AW performance is measured with which of the following methods?
(Ref:4.350)
A. 4-ball Wear Scar""
""B. Falex OK Load
C. RPVOT
D. A & B""
"
A - ANS-"What is the most common viscosity measurement criteria? (Ref:4.30)
A. Kinematic
B. Ultrasonic
C. Hyperbolic
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller denicetho. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.24. You're not tied to anything after your purchase.