AMT 2 STUDY GUIDE 100% Correct Answers Verified Latest 2024 Version
3 views 0 purchase
Course
AMT
Institution
AMT
AMT 2 STUDY GUIDE | 100% Correct
Answers | Verified | Latest 2024 Version
Amtrak Conductors and Engineer are classified as class ______ employees - C. [1.103]
Should employees in electrified territory be familiar with the location and operation of radios and
telephones? - Yes [1.204]
When usin...
AMT 2 STUDY GUIDE | 100% Correct
Answers | Verified | Latest 2024 Version
Amtrak Conductors and Engineer are classified as class ______ employees - ✔✔C. [1.103]
Should employees in electrified territory be familiar with the location and operation of radios and
telephones? - ✔✔Yes [1.204]
When using railroad telephone lines or radios, and you hear the word "EMERGENCY" repeated three
times, what must be done? - ✔✔All others using the phone line or radio channel must yield immediately.
[1.205]
All occurrences or conditions which are likely to affect electric Operations must be reported immediately
to whom? - ✔✔The Power Director/Train Dispatcher. [1.201]
Minimum Approach Distance means? - ✔✔The distance that must be maintained between personnel
and or equipment and all exposed energized lines. Minimum Approach Distance is measured between
the person or the end of a tool, equipment, or material being used and the exposed energized parts.
[1.301]
All overhead wires must be considered energized (Live) at all times except? - ✔✔When it is known to be
de-energized, tested de-energized and grounded. [1.302]
The third rail must be considered energized (live) at all times except? - ✔✔When it is known to be de-
energized, tested de-energized and a Third Rail Warning Device is applied. [1.303]
Electric engines and Multiple Units (MU) under overhead wires must be considered energized (Live)
except? - ✔✔When it is known that all Pantographs are down and Pantograph grounding switches are
closed, or overhead wires are de-energized, tested de-energized and properly grounded. [1.501]
Can employees touch or remove unidentified dangling wires, trees, or foreign objects in contact with
overhead wires or third rail? - ✔✔NO ,employees must take necessary precautions to protect others and
equipment and maintain Minimum Approach Distance . [1.206]
, Conductive material such as steel tape measure, wire, wet or non-rated rope, or linen tape-line
containing metallic reinforcement can be used around energized wire, apparatus, equipment, or third
rail. True or False? - ✔✔False. [1.114]
The Minimum Approach Distance for AMT-2 Qualified Employees whether or not protected by Class A
employee against Transmission Wires energized or de-energized and not grounded is? - ✔✔8ft. [Table 1]
What is the Minimum Approach Distance for AMT-2 Qualified Employee whether or not protected by a
Class A employee against the Catenary, Signal Line, and Utility Wires less than 35000 volts, energized or
de-energized and not grounded? - ✔✔3ft. [Table 1]
What is the Minimum Approach Distance for AMT-2 Qualified Employees against Transmission Wires for
equipment operating in the vicinity of wires energized or de-energized and not grounded? - ✔✔15ft.
[Table 1]
The Minimum Approach Distance for AMT-2 Qualified Employees against Catenary, Signal Line, Utility
Wires Less than 35000 volts for Equipment operating in the vicinity of wires energized or de-energized
and not grounded is/ - ✔✔3ft. [Table 1]
Personnel and Equipment being provided protection by Class A Employee, wires de-energized, tested de-
energized, and grounded will be allowed? - ✔✔Full Contact. [Table 1]
The Minimum Approach Distance for Unidentified Dangling Wires is? - ✔✔15ft. [Table 1]
What is the Minimum Approach Distance while walking over and around energized Third Rail? - ✔✔6
inches. [Table 2]
what is the Minimum Approach Distance for AMT-2 Qualified Employees working with conductive tools
or equipment around Third Rail? - ✔✔4 feet. [Table 2]
The Typical Overhead Wire Profile for the Catenary system starting from The Wire that contacts the
Pantograph are? - ✔✔Contact wire, Auxiliary wire, Messenger wire, Signal line, Transmission line, Static
wire. [Figure 9]
What must be done prior to operating in electrified territory? - ✔✔A job Briefing. [1.401]
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller hov. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $8.49. You're not tied to anything after your purchase.
