CA State Elevator Mechanic Study Guide 100% Correct Answers | Verified | Latest 2024 Version
5 views 0 purchase
Course
CA,
Institution
CA,
CA State Elevator Mechanic Study Guide
| 100% Correct Answers | Verified |
Latest 2024 Version
Ladder must be installed if pit is deeper than... - 35" (3') ASME A 17.1 - 2004 2.2.4.2
Ladder shall not extend more than ___ above the sill. - 48" (4') ASME A 17.1 - 2004 2.2.4.2
Rungs (cleats or st...
CA State Elevator Mechanic Study Guide
| 100% Correct Answers | Verified |
Latest 2024 Version
Ladder must be installed if pit is deeper than... - ✔✔35" (3') ASME A 17.1 - 2004 2.2.4.2
Ladder shall not extend more than ___ above the sill. - ✔✔48" (4') ASME A 17.1 - 2004 2.2.4.2
Rungs (cleats or steps) of ladder should be a minimum of ___ wide. - ✔✔16" ASME A 17.1 - 2004 2.2.4.2
Siderails shall have a clear distance of not less than ___ from their centerline to the nearest permanent
object. - ✔✔4.5" ASME A 17.1 - 2004 2.2.4.2
Ladder access shall not be permitted if pit is deeper than ___ below the sill of the access door. - ✔✔120"
(10') ASME A 17.1 - 2004 2.2.4.2
Illumination of pit and platform should be___. - ✔✔10FC ASME A 17.1 - 2004 2.2.5.1
Where should the light switch be located in the pit? - ✔✔Where accessible from the pit access door.
ASME A 17.1 - 2004 2.2.6.1
When the car is on compressed buffer, what is the clearance between the car and the pit? - ✔✔24" (2')
clearance. No part of the car should be touching the pit with a 24" (2') clearance. ASME A 17.1 - 2004
2.4.1.1
Where vertical clearances are less than ____", that area should be clearly marked on the pit floor. -
✔✔24" (2')
Markings should be___" diagonal red and white stripes "Danger low clearance." - ✔✔4"
, When oil buffers are used, bottom runny should be no less than ___". - ✔✔6"
When spring or solid buffers are used, bottom runny should be no less than ___". - ✔✔6"
What is the maximum bottom runby on a car? - ✔✔24" (2')
Buffer data plate letters shall be no less than ___" in height. - ✔✔1"
What is the maximum bottom runby on a counterweight? - ✔✔35" (3')
What is the minimum sill to sill clearance? (side guides) - ✔✔1/2"
What is the minimum clearance for corner guides? - ✔✔.8" (7/8")
What is the maximum clearance for side guides and corner guides? - ✔✔1.25" (1 1/4")
What is the running clearance between cars? - ✔✔2"
What is the clearance between car sill and hoistway facia or enclosure for vertical doors? - ✔✔7 1/2"
Only machinery used in conjuction with the function of elevator shall be permitted in the ___ room. -
✔✔machine
A clear path of ___" should be provided to all components that require maintenance in the machine
room. - ✔✔18"
Access doors to machine room and overhead machinery spaces shall be a minimum width of ___" and a
minimum height of ___". - ✔✔Minimum width = 29.5" and minimum height = 80"
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller hov. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $7.99. You're not tied to anything after your purchase.