100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
ACI Certification Exam with 100% correct answers | $7.99   Add to cart

Exam (elaborations)

ACI Certification Exam with 100% correct answers |

 0 view  0 purchase
  • Course
  • Institution

ACI Certification Exam with 100% correct answers |

Preview 2 out of 5  pages

  • June 17, 2024
  • 5
  • 2023/2024
  • Exam (elaborations)
  • Questions & answers
avatar-seller
ACI Certification Exam
According to ASTM C 138 what is the air content (in percent) of the following concrete batch?
Theoretical Density = 168 lb/cuft Density = 158 lb/cuft - ANS-6.0% = [(168-158)/168] x 100

According to ASTM C 138 what is the density of the following concrete batch?
Mass of Measure 7.4 lbs

Mass of Measure w/ Concrete 44.5 lbs

Volume of Measure .254 CF - ANS-146.06 lb/cf = (44.5-7.4)/0.254

According to ASTM C 138 what is the relative yield of the following 5 cubic yard concrete batch?
Mass of all materials batched 19,775 lbs

Density of Concrete 146 lbs/cuft - ANS-1.003 = (19775/(146 x 27))/5

According to ASTM C 138 what is the yield of the following concrete batch in cubic yards? Mass
of Materials Batched = 12645 lbs Density of concrete = 156 lbs/cuft - ANS-3.00 CY =
(12,645/(156 x 27))

After consolidation of the final layer, the concrete is ½ inch above the top of the measure, what
should be done? - ANS-remove excess concrete with a scoop or trowel

After strike off of the measure used to determine density, a small quantity of concrete may be
added to correct a deficiency? - ANS-False

ASTM 173 is appropriate for testing concretes containing lightweight aggregates. - ANS-True

ASTM 173 specifies a minimum time requirement for inverting and agitating the meter to free
concrete from the base. - ANS-True

ASTM 173 specifies that at the very end of the test the tester must make sure that there are
portions undisturbed in the bottom of the bowl, if so the test is valid. - ANS-False

ASTM 173 specifies that the bowl is filled in 3 lifts. - ANS-False

ASTM C 1064 - ANS-Temperature of freshly mixed concrete

ASTM C 1064 defines the maximum recommended temperature for concrete. - ANS-False

ASTM C 138 - ANS-Density, Unit Weight, Yield, and Air Content (Gravimetric) of Concrete

, ASTM C 143 - ANS-Slump of hydraulic cement

ASTM C-172 - ANS-Sampling

ASTM C172 covers sampling from stationary, paving and truck mixers, and from agitating and
non-agitating equipment used to transport central-mixed concrete. - ANS-True

ASTM C173 - ANS-Standard Test Method for Air Content of Freshly Mixed Concrete by the
Volumetric Method

ASTM C231 - ANS-Air Content of Freshly Mixed Concrete by the Pressure Method

ASTM C31 - ANS-Standard Practice for Making and Curing Concrete Test Specimens in the
Field

At the end of the pressure method procedure, how is the pressure released from the Type B air
meter? - ANS-Opening both petcocks

Each temperature-measuring device should be calibrated ________, or whenever there is a
question of _________. - ANS-Annually, Accuracy

Field cured specimens can be used to determine whether a structure is capable of being put
into service, and can take the place of standard cured specimens. - ANS-False

For concrete mixtures with a specified strength greater than 6000 psi the initial curing
temperature should be - ANS-68-78 degrees F

How do you regulate the rate of discharge of the batch from the revolving truck drum mixer or
agitator? - ANS-By the rate of revolution of the drum

If rodding is the method of consolidation being used in C138, the measure must be filled in how
many layers? - ANS-3

If the aggregate correction factor for a given source of fine and coarse aggregate is found to be
0.2% in a pressure air meter, and an air content value of 5.0% is read on the gauge of the same
air meter containing concrete with the same aggregate, what is the correct air content? -
ANS-4.8% (5.0-.2)

If the aggregate is too large, it must be ________________. - ANS-Wet sieved over the 1 1/2"
sieve

If the sample is vibrated the duration of vibration should last ___________. - ANS-Until the
surface concrete is smooth

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller AnswersCOM. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $7.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

74534 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$7.99
  • (0)
  Add to cart