100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Suspension & Steering A4 copy unit 5 Questions with 100% correct answers verified latest update 2024 $7.99   Add to cart

Exam (elaborations)

Suspension & Steering A4 copy unit 5 Questions with 100% correct answers verified latest update 2024

 4 views  0 purchase
  • Course
  • Institution

Suspension & Steering A4 copy unit 5 Questions with 100% correct answers verified latest update 2024

Preview 2 out of 12  pages

  • June 17, 2024
  • 12
  • 2023/2024
  • Exam (elaborations)
  • Questions & answers
avatar-seller
Suspension & Steering A4 copy unit 5
A typical air bag deployment time is: - ✅✅-40 milliseconds
✅✅
Technician A says a bent center link will affect front wheel toe. Technician B says a
bent center link willaffect front wheel camber. Who is correct? - -A


✅✅
Reduced rear curb riding height may cause damaged rear strikeout bumpers. -
-T

After a power recirculating ball steering gear is properly adjusted, the steering wheel
free play is still excessive. Technician A says the steering gear mounting bolts may

✅✅
be loose. Technician B says the high-pressure power steering hose may be
restricted. Who is correct? - -A


✅✅
A loose worm shaft bearing preload adjustment may cause a rattling noise when
driving on irregular road surfaces. - -F

The specified vehicle lift points can be found in a service manual. - ✅✅-T
✅✅
On a power steering pump with a variable assist steering actuator, what component
controls the actuator: - -PCM

An electronic power steering (EPS) system is being discussed. Technician A says if
the engine stalls and the ignition switch is on, the EPS remains operational.
Technician B says if the steering wheel is turned and held fully in one direction, the

✅✅
power module reduces current flow through the steering gear motor to prevent motor
overheating. Who is correct? - -BOTH


✅✅
In a MacPherson strut-type rear suspension, the struts are bolted to the top of the
spindles. - -T

When the brakes are applied with the doors closed on a vehicle with an electronic air

✅✅
suspension system, the air suspension module ignores all requests from the height
sensors. - -T

A fine-toothed file may be used to clean a sticking flow control valve. - ✅✅-F
✅✅
I​n some traction control systems if the control module senses drive wheel spin, the
first action taken by the control module is to: - -N ​Apply the brake on the
spinning drive wheel

, ✅✅
The right-front wheel setback is excessive on a MacPherson strut front suspension
system. The most likely cause of this problem is: - -N A binding right-upper
strut mount.


✅✅
When the tread wear indicator is visible across the tread, the tire should be: -
-Replaced

Technician A says that most front-wheel-drive cars have a frame that is separate
from the body. Technician B says that most full size SUVs and trucks have a unitized

✅✅
body that combines the frame and body into one unit. Who is correct? -
-NEITHER

Technician A says when the suspension height is normal, the valve orifices in a
travel-sensitive strut provide more resistance to oil movement. Technician B says a

✅✅
travel-sensitive strut provides more resistance to oil movement when the speed of
upward or downward wheel movement increases. Who is correct? - -B

During a road test on a front-wheel drive vehicle, it is determined that the vehicle

✅✅
pulls right after a right turn, and pulls left after a left turn. The most likely cause of
this condition is: - -A binding upper strut bearing

Radial tire runout should be measured with a: - ✅✅-Dial indicator
✅✅
Types of ball joint mounting in the lower control arm include all of these EXCEPT: -
-Welded


✅✅
​When inspecting and servicing front wheel bearings on front-wheel-drive cars: -
-​Some front wheel bearings mounted in the steering knuckle contain two
tapered roller bearings with a split inner race.


✅✅
​The perimeter-type frame is used when heavy load-carrying capacity is needed. -
-F

Technician A says a tire pressure check is not required before a wheel alignment.

✅✅
Technician B says a front wheel bearing play should be checked before a wheel
alignment. Who is correct? - -B

Technician A says some automatic air suspension systems have rotary height

✅✅
sensors. Technician B says rotary height sensors contain a Hall Effect element. Who
is correct? - -BOTH


✅✅
Which of these alignment angles assists in the return of the steering wheel to the
straight-ahead position? - -SAI

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller ACTUALSTUDY. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $7.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

77824 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$7.99
  • (0)
  Add to cart