Exam (elaborations)
Boilermaker NCCR Test/158 Questions with Answers/A+ Graded
- Course
- Institution
Boilermaker NCCR Test/158 Questions with Answers/A+ Graded
[Show more]
Seller
Follow
Victorious23
Reviews received
Content preview
Boilermaker NCCR Test/158 Questionswith Answers/A+ Graded
When are steel chain slings recommended? - -When rigging from three
points
-A big control valve is pulled who is responsible for the rigging? - -Crane
operator and rigger
-What should be used to hold the pipe when setting up two 40-foot joints of
16-inch STD WT pipe? - -4 legged roller top jacks
-The hitch made by wrapping the sling around the load, then passing one
eye of the sling throughout a shackle is called? - -Choker Hitch
-When should rigging material be attached to a bean that is being
demolished? - -Before any bolts are removed or any cutting is done on the
beam.
-Which of the following has a greater possibility of being a respiratory
hazard? - -Asbestos
-Which type of insulation is required before a vessel is entered? - -Locking,
Tagging, and Blinding lines that feed the vessel
-According to OSHA, oxygen and acetylene cylinders in storage must be
separated at what minimum distance? - -20 Ft
-What is the first thing a boilermaker should do before cutting into a tank or
vessel? - -Determine the content
-What tool is normally used to check the alignment on the horizontal seams
of the shell plates? - -A 2-foot level
-What is used to expand tubes inside mud and steam drums? - -Rolling
motors and espanders
-What does a grooved nut on an Acetylene rig indicate? - -The left hand
thread is for acetylene use only
-Thermal beveling of pipe in preparation for welding requires use of an? - -
Oxyfuel Torch
, -A 1-inch plate is to be cut. Why should an acetylene gerulator on a cutting
rig not be adjusted over 15 PSI? - -Acetylene is unstable above this pressure
-What action should be taken if a boiler tube fails? - -Replace the failed tube
-Before a wall burner is pulled for inspection - -The fuel gas valve must be
shut
-Which of the following is a type of insulation used inside furnaces? - -Fire
Brick
-What does "MTW" mean in reference to boiler tubing? - -Minimum Wall
Thickness
-On a drawing, what is used to record any changes to the drawing? - -
Revision Block
-Scales on a drawing are usually written in - -inches and feet
-Dimensional measurements can be found on all of the following except - -
Mechanical flow diagram
-All vessels elevations are taken from the - -top of steel on the embed ring
(base plate)
-A gate valve is being removed from a product line. All of the following
procedures must be performed except? - -Valve must be in closed position
-What is a spud wrench most commonly used for? - -Aligning flanges
-What type of valves are typically used on a sight glass to direct flow? - -3
way valves
-Handhole cap and plug material is verified by the - -P4 report
-What are the four major components of a gate valve? - -Body, Bonnet,
gate, and stem
-What is the most commonly used fasteners in boiler construction? - -
Threaded
-On site, who determines what grade of material to be used for repair? - -
QA/QC
-What is the best tool to be used to prepare XXH 2-inch tubing for welding? -
-Milling Motor
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Victorious23. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
80364 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now