API 510 Practice Test (Referenced) 100% Solved 2024
1 view 0 purchase
Course
API 510
Institution
API 510
API 510 Practice Test (Referenced) 100% Solved 2024
Substituting NDE procedures for a pressure test after major repair may be done only after:
API 510 5.8.8.1
The engineer and inspector have approved.
An example of vessels not covered by API 510 are:
API 510 1.1.1
Vessels officially retir...
API 510 Practice Test (Referenced) 100% Solved
2024
Substituting NDE procedures for a pressure test after major repair may be done only after:
API 510 5.8.8.1
The engineer and inspector have approved.
An example of vessels not covered by API 510 are:
API 510 1.1.1
Vessels officially retired from service and abandoned in place.
ACFM is an acronym for:
ASME SEC 5 Article 15
Alternating Current Field Measurement
A pneumatic testing precedure should be developed by whom before conducting the test?
API 510 5.8.6
Engineer
A signal of discontinuity in the material under nondestructive examination is considered:
API RP 577 3.1.36
Indication
In what type of service should vessels be evaluated for potential fatigue cracking failures and have
appropriate inspections planned?
API 510 5.4.4
Cyclic Service
Corrosion and other damage identified during inspections and examinations must be characterized,
sized, and evaluated per Section 7 (Inspection Data Evaluation, Analysis, and Recording) with
deviations from the inspection plan being approved by whom?
API 510 5.5.1
Inspector or Engineer
Inspection tasks typically associated with hot tapping or welding on in-service equipment should
include:
API 577 11.2.5
Positive Metal Identification (PMI)
Any repair welding should be performed according to a procedure accepted by the:
API 510 8.1.1
Inspector or Engineer
Welding of carbon steel with carbon contents over 0.30%
API 510 8.1.5
May need special attention and preheating to avoid weld cracking.
, Inspector recommendations can be changed or deleted after review by whom?
API 510 6.9
Pressure Vessel Engineer or Inspection
Supervision
Deposited weld metal on the face of a weld preparation or surface that will be part of a welded
joint is referred to as:
API 577 3.1.14
Buttering
Which type of ultrasonic display shows the amplitude of the signal coming from the discontinuity as a
function of time?
API 577 9.9.2.1
A-scan Display
Flame-sprayed aluminum coatings have been used on carbon steels to prevent what damage
mechanism?
API 571 4.3.3.6
Corrosion Under Insulation
What is the effect on time to failure by SSC as material strength, applied tensile stress and
environmental charging potential increases?
API 571 5.1.2.3.3
Decreases
External inspection intervals for vessels in non-continuous service are the same as continuous service
vessels because:
API 510 6.4.2
The external environment does not change.
Per API 510, inspection for CUI shall be considered for duplex stainless steel pressure vessels that
operate at temperatures between:
API 510 5.5.6.1
280°F (138°C) and 350°F (185°C)
Supplemental Essential variables must be addressed on the WPS when:
ASME SEC 9 QW-251.2
Toughness tests are required or specified.
The alternating current field measurement (ACFM) method is an electromagnetic inspection
technique which can be used to detect and size defects that:
ASME SEC 5 Article 15 T-1520
Break the surface of the material.
What form of NDE may not be effective for finding tight, scale filled cracks and should not be used as
the only means of detection for Caustic Stress Corrosion Cracking?
API 571 4.5.3.7
PT
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller ACADEMICAIDSTORE. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.69. You're not tied to anything after your purchase.
