API 510 Questions and Answers 100% Pass
NDE examinations must be scheduled at intervals that consider the
Probability of the NDE method to identify the damage
What is the transition temperature of a metal?
The temp at which the material fracture code changes from ductile to brittle
A prim...
NDE examinations must be scheduled at intervals that consider the
Probability of the NDE method to identify the damage
What is the transition temperature of a metal?
The temp at which the material fracture code changes from ductile to brittle
A primary goal of API 510 internal inspection is to
Find damage that cannot be found by monitoring external CMLs
When conducting a hydrostatic pressure test special attention should be given
when testing low alloy steels especially 2 1/4 cr because
They may be prone to temper embrittlement
What is the maximum chloride concentration allowed for water or steam when
hydro testing 300 series
50 ppm
For austenitic stainless steel the susceptible temperature range of CUI is
140 degrees and 400 degrees
How many systems and procedures must be documented and implemented per
API 510 in a owner user inspection repair management system for pressure
vessels and pressure relief devices
19
The consequence of a release is dependent on
The type and amount of process fluid contained in the equipment
The surface at a weld with a joint factor the 1.0 is corroded. The calculation to
determine if the thickness at the corroded are governs the allowable working
pressure should be
The thickness of the surface of the weld includes 1" or twice the minimum thickness on
either side of the weld whichever is greater
, A methodology whereby flaws and conditions contained within an equipment
item are assessed in order to determine the integrity of the equipment for
continued service is referred to as
Fitness for service evaluation
What is a pressure vessel engineer responsible for
Activities involving design engineering review analysis or evaluation of vessels
When can pressure tests of vessel components be performed in lieu of entire
vessel testing
After consultations with an engineer
An inspection plan shall be developed for
All pressure vessels and pressure relieving devices
Which of the following techniques is specifically cited by API 577 as having
special limitations due to concerns for incomplete fusion
GMAW -Spray transfer
According to API 510 on stream inspections should be conducted by whom
An inspector or examiner
All tools equipment and personal protective equipment used during vessel work
Should be check prior to work
Welding inspection occurs
Prior to, during, and after welding
During welding operations the inspector should confirm that
The welding parameters are supported by the WPS and WPQ
NDE is defined as those inspection methods which allow materials to be
examined
Without damaging the component
According to API 510 when do inspectors need to inspect non pressure internals
of pressure vessels
When requested by other operations personnel
An inspector plan shall be established for
All pressure vessels and pressure relieving devices within the scope of API 510
When the term engineer is used in the API 510 code it refers to
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller SUPERGRADES01. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $7.79. You're not tied to anything after your purchase.
