nccco telescopic core review questions and answers
Written for
NCCCO Telescopic core review questions and Answers
NCCCO Telescopic core review questions and Answers
NCCCO Telescopic core review questions and Answers
All documents for this subject (1)
Seller
Follow
Victorious23
Reviews received
Content preview
NCCCO Telescopic core review
questions and Answers 2024
The lattice boom is designed to take winds of up to 20 mph. from the side
plus a full rated load, plus a direct side load equal to what percent of the
rated load?
A. 1%
B. 2%
C. 3%
D. 4% - -B. 2% Answer
-A long boom crane working at minimum radius and 3 degrees out of level
will have a loss of capacity by;
A. 30 %
B. 25%
C. 75%
D. 50% - -D. 50% Answer
-On the majority of conventional cranes the power is transferred to a torque
converter by a;
A. Hydraulic fluid
B. Master clutch
C. In and out box
D. None of above - -B. Master clutch Answer
-What is the minimum design factor required for a right regular lay main
boom auxiliary hoist rope?
A. 5
B. 3.5
C. 3.0
D. 7 - -B. 3.5 Answer
-On a standing rope, how many broken wires need to be broken at an end
connection before replacing the rope?
A. 1
B. 2
C. 3
D. 5 - -B. 2
, -According to OSHA 1926.1412, how often should all running ropes in
service be visually inspected ___________ and in accordance with ____________.
A. Working day , B30.21
B. Each shift, 1926.1413(a)
C. Each week, b30.33
Monthly, 1926.1433 - -B. Each shift, 1926.1413(a) Answer
-When rotation resistant ropes are used in boom hoisting reeving systems,
sheaves used shall have a rope pitch diameter of not less than?
A. 22 times
B. 25 times
C. 18 times
D. 30 times - -C. 18 times
-When a lattice crane is in a Tower configuration and the crane has a
variable position gantry, the gantry should be in which position?
A. In the ½ up position
B. In the full down position
C. In the full up position
In the ¾ up position - -C. In the full up position
-Lattice boom cranes manufactured after 2-28-92 must have which safety
device installed?
A. Load Moment Indicator
B. Drum rotation indicator
C. Boom limiter
D. Anti-two block warning device - -D. Anti-two block warning device
-Lattice boom cranes manufactured after 11-8-2011 must have which safety
device installed
A. Load Moment Indicator
B. Drum rotation indicator
C. Boom limiter
D. Anti-two block prevention device - -D. Anti-two block prevention device
-What is the minimum design factor required for a pendants or standing
ropes shall not be less than?
A. 2.5
B. 3.5
C. 3.0
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Victorious23. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $8.49. You're not tied to anything after your purchase.