NCCER Core Module 1 | 100% Correct
Answers | Verified | Latest 2024 Version
Companies with strong safety cultures usually have lower? - ✔✔Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of - ✔✔unsafe
conditions
The activity that consists of breaking a job into its component tasks and then analyzing each step for
potential hazards is called a _____. - ✔✔Job Safety Analysis
A measure of the probability, consequences, and exposure related to an event is referred to as _____. -
✔✔Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to
_____. - ✔✔Cover and mark it
The D-ring or support point on a safety harness should be placed _____. - ✔✔Between the shoulder
blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____. - ✔✔Competent person
Lanyards that have no shock-absorbing features are used for _____. - ✔✔Positioning
When placing a ladder against a platform or roof, the top of the ladder should extend above the point
where
the ladder touches the platform or roof by at least _____. - ✔✔3 Feet
When performing overhead work on scaffolding, what protective measures must be taken to prevent
objects
Answers | Verified | Latest 2024 Version
Companies with strong safety cultures usually have lower? - ✔✔Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of - ✔✔unsafe
conditions
The activity that consists of breaking a job into its component tasks and then analyzing each step for
potential hazards is called a _____. - ✔✔Job Safety Analysis
A measure of the probability, consequences, and exposure related to an event is referred to as _____. -
✔✔Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to
_____. - ✔✔Cover and mark it
The D-ring or support point on a safety harness should be placed _____. - ✔✔Between the shoulder
blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____. - ✔✔Competent person
Lanyards that have no shock-absorbing features are used for _____. - ✔✔Positioning
When placing a ladder against a platform or roof, the top of the ladder should extend above the point
where
the ladder touches the platform or roof by at least _____. - ✔✔3 Feet
When performing overhead work on scaffolding, what protective measures must be taken to prevent
objects
