Exam (elaborations)
Woodshop study guide Questions and Answers Rated A+
- Course
- Institution
Woodshop study guide Questions and Answers Rated A+
[Show more]
Seller
Follow
ACTUALSTUDY
Reviews received
Content preview
Woodshop study guideWhat safety protection is needed when using drills or drivers? - CORRECT
ANSWER-Safety goggles / ear protection
A drill chuck typically has how many jaws? - CORRECT ANSWER-Three
Which tool is best for driving screws into wood? - CORRECT ANSWER-Driver
How can you prevent boring holes into our tables? - CORRECT ANSWER-Use
sacrificial wood
How can you prevent splitting your material when driving a screw? - CORRECT
ANSWER-Pilot hole
What is a simple way to gauge the depth of your hole when drilling? - CORRECT
ANSWER-Measure from the tip of drill and use tape to wrap around drill bit to mark it
A ______________ wrench is used to adjust the length of the piloting bit, when using
a countersink bit. - CORRECT ANSWER-Allen
What is the most common way that students break our precious drill bits? -
CORRECT ANSWER-Not having good contact between bit and hardware
What features of the jigsaw make it better for cutting large shapes, or large panels of
wood? - CORRECT ANSWER-The long skinny saw bit makes it easy to maneuver
What is the difference between coarse-tooth and fine-tooth blades? - CORRECT
ANSWER-Coarse tooth has fewer and larger teeth for bigger projects while Fine
tooth has many smaller teeth for more intricate work
Which blade is best choice for cutting a 2.5 inch diameter circle out of ¼" plywood. -
CORRECT ANSWER-Fine Tooth
Can a jigsaw be used to pierce shapes out of planar wood? And what tool is
necessary first to do so? - CORRECT ANSWER-Yes, Fine Tooth
Should the blade be touching the edge of the material before you start up the saw? -
CORRECT ANSWER-No, start the saw before making contact with the material
, How many clamps are best for holding your workpiece? - CORRECT ANSWER-Two
Where should your non-trigger hand be placed? - CORRECT ANSWER-On front
hand grip and away from blade
Before touching or changing blades you should first make sure of these two things? -
CORRECT ANSWER-The saw is unplugged and off / The blade is hot so use
caution
Why use a drill press over a hand drill? - CORRECT ANSWER-90 degrees to work
surface, don't have to push as hard into your piece
What are the most commonly used bits for drill press? - CORRECT ANSWER-Flute,
Forstner, Spade
What tool is used to tighten a bit into the chuck? - CORRECT ANSWER-Chuck Key
T/F The table should always be unlocked before beginning to drill into your material.
- CORRECT ANSWER-False
Why would you ever want to raise or lower the table? - CORRECT ANSWER-Closer
or farther from the bit depending on the length
Do you need to put the drill press into reverse to pull out? - CORRECT
ANSWER-No, there is not reverse
What is the machinist vise used for? - CORRECT ANSWER-Drill in small piece of
wood
What is a safe way to drill into a dowel rod? - CORRECT ANSWER-Use a V block
What type of blade does the panel saw have? - CORRECT ANSWER-Circular
What is the saw mounted onto? - CORRECT ANSWER-Carriage
What is the name of the type of cut that is vertical? - CORRECT ANSWER-Cross cut
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller ACTUALSTUDY. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $7.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
78998 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now