ASQ: Ch 14- Techniques, Methodologies And Tools Ap
ASQ: Ch 14- Techniques, Methodologies And Tools Ap
ASQ: Ch 14- Techniques, Methodologies and Tools Ap
Exam (elaborations)
FPC Processing (1).
2 views 0 purchase
Course
ASQ: Ch 14- Techniques, Methodologies and Tools Ap
Institution
ASQ: Ch 14- Techniques, Methodologies And Tools Ap
Exam of 7 pages for the course ASQ: Ch 14- Techniques, Methodologies and Tools Ap at ASQ: Ch 14- Techniques, Methodologies and Tools Ap (FPC Processing (1).)
ASQ: Ch 14- Techniques, Methodologies and Tools Ap
All documents for this subject (27)
Seller
Follow
lydiaomutho
Content preview
FPC Processing
(006) Correct any evidence of wear or deterioration in a clean room at the first opportunity in
order to prevent. - ANS-A) generation or accumulation of contaminants.
(007) Inspect all printing equipment - ANS-B) immediately before you use it.
(007) Flush mixing tanks and recirculation systems - ANS-A) before and after mixing each batch
of solution.
(008) Process exposed film as soon as possible because - ANS-C) chemical deterioration of the
latent image can occur.
(008) What occurs if you remove film from its container while its temperature is below the
dewpoint of the surrounding air? - ANS-C) Condensation.
(009) Any solution above or below the required concentration will behave as a - ANS-A)
contaminated solution.
(010) Which personal habit must you avoid in the clean room environment? - ANS-D) Scratching
and rubbing exposed areas of your body.
(011) Clean room de-dusting procedures are mandatory upon - ANS-A) entering the clean room.
(012) Which reference is an advantage of the metric system? - ANS-C) Most industrialized
countries use the metric system.
(012) In the metric system, what are three basic units of measurement? - ANS-A) Liter, gram,
and meter.
(013) Convert 375 meters to centimeters. - ANS-C) 37,500.
(013) Converting measurements from one unit to another (meters to centimeters or milligrams to
grams) is a function of - ANS-D) multiplication or division.
(014) The order of the rule of precedence in solving mathematical problems is - ANS-C) multiply,
divide, add, and subtract.
(014) Applying the rules of precedence, solve the equation 6 + 8 x 4 - 6 ÷ 3. - ANS-C) 36
(014) Round 67.455 to the nearest tenth. - ANS-B) 67.5
, (015) If a photographic process requires starter to be added to the developer at a rate of 3
ounces of starter to 1 gallon of developer, how much starter must you add to 12 gallons of
developer? - ANS-C) 36 ounces.
(015) Solve the equation 4.2 x 10-2 - ANS-C) 0.042.
(015) The square root of 64 equals - ANS-B) 8
(016) Find the common logarithm of 1,000. - ANS-A) 3
(016) What is the characteristic of 245? - ANS-B) 2
(016) The log of 5.95 has a mantissa of .7745. What is the log of 595? - ANS-C) 2.7745.
(017) What is the advantage of using logarithms to solve mathematical equations? - ANS-B)
When you must multiply large numbers.
(017) With multiplication equations, generally speaking, how many place tables will give you
sufficient accuracy? - ANS-A) Four.
(018) How do you use a calculator to find the antilog 2 .395? - ANS-D) Enter the mantissa (.395)
into the calculator; press the keys labeled "INV" and "LOG". Locate the decimal point two places
to the left.
(019) Find the mean of 23, 8, 16, 20, 23. - ANS-B) 18.
(019) The number that divides the bottom 50 percent from the top 50 percent of a set of
numbers is called the - ANS-C) median.
(020) To find the range of a set of numbers, - ANS-B) subtract the smallest value in the set from
the largest value.
(020) If the mean WAPS test score for Staff Sergeants is 74 with a standard deviation of 2.6,
statistically, what percentage of those testing scored between 68.8 and 79.2? - ANS-
(031) Why is it important to mix chemicals in their proper order and to ensure that each is
thoroughly dissolved before adding the next? - ANS-C) Not doing so can cause an adverse
reaction.
(032) How do you minimize the chance of contamination when mixing chemical dust in water? -
ANS-A) Mix them in nonporous containers that are inert to the solutions.
(033) Because specific gravity varies from one batch of solutions to another, you must measure
each batch - ANS-B) by setting upper and lower control limits.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller lydiaomutho. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $7.99. You're not tied to anything after your purchase.