Cbspd 126 exam prep Questions Correctly Answered

18 inches - ️️How many inches should sprinklers be on top shelf 3 to 3 1/2 minutes @ 270 or 273 with no drying time. - ️️What is the cycle for specified for a Bowie-Dick test? 4 per hour - ️️Air exchanges for sterile storage? 60-65 degrees/ 30-60% - ️️Decon temperature and humidity: 60-65 degrees/ 30-60% - ️️HLD area temperature and humidity: 68-73 degrees/ 30%-60% - ️️Sterilization temperature and humidity: 68-73 degrees/ 50%-35% - ️️The temperature/ humidity range in prep and pack should be: 68-73 degrees/ideally 50% no less than 35% - ️️Prep & pack temperature and humidity: 68-75 degrees/35%-70% - ️️Sterile Storage temperature and humidity: 70% - ️️The relative humidity in sterile storage area should not exceed 8-10 inches - ️️How many inches from floors should medical devices be kept 90% - ️️What is a log reduction of 1? 90% - ️️Why is a log reduction of 1? Air exhausted directly to the outside - ️️Negative pressure refers to As it enters the jacket - ️️In a non-tabletop sterilizer, a gauge on the main steam line, usually located at the back of the sterilizer, tells you the steam pressure: At least 1 in - ️️How many inches of space between chamber wall and package? At least 1 in - ️️How many inches of space should there be between the chamber walls and packages to prevent scorching of package materials? At least 2 inches; temp differences can cause moisture to condense on surface inside walls - ️️How many inches from outside walls must shelving be and why At least daily - ️️Biological monitoring of the hydrogen peroxide-ozone sterilization process should be performed Biological monitoring - ️️- is the only way to measure the lethality of a sterilization process