Exam (elaborations)
Nascla (questions well answered) verified already passed
- Course
- Institution
Nascla (questions well answered) verified already passed
[Show more]
Content preview
NasclaErector - correct answer 1/2 diameter bolt min. For any precast concrete connextion
Erector - correct answer Swinging scaffold for 3 workers min. Load is 750lbs
Erector - correct answer Min. breaking strength for a nylon lanyard is 5,000lbs
Post-tensioning - correct answer Tendon is not pulled until 75% full strength
- correct answer The sheathing should be cut back 1" from the form. The tendon tail should extend 12"
from the form
- correct answer Banded tendons should be bundled not more than (5) 1/2 inch or (4) 0.6 inch in a
group
- correct answer Recommended 1-1/2 minimum between tendons. Minimum #4 rebar used to support
tendons
- correct answer With a two stroke pull, the final stroke must be 60% of the first pull
- correct answer The strand length protruding beyond the wedges after cutting shall be between 1/2
and 3/4 of an inch. The cap filled with a p/t coating must be installed within 24 hours never exceed 96
- correct answer Stress barrier cable 80% of the ultimate strength of the strand
construction project management - correct answer 1/4 of the construction in u.s is done with public
money
, Value Engineering - correct answer A process that considers cost in factors like life cycle, cost, quality,
durability and maintainability
- correct answer Since OSHA establishment in 1971, fatalities have been cut by 65%
Steel deck - correct answer Standard deck widths 12", 18", 24",40",36"
Composite floor deck - correct answer Acts as a working platform, stabilizes the frame, serves as
concrete form for the slab, reinforces the slab to carry the design loads
Roof deck - correct answer Acts alone in transferring horizontal and vertical loads into the building frame
Cellular deck - correct answer Made by attaching a bottom steel sheet to a roof or composite floor deck
panel
Form deck - correct answer Can be any floor or roof deck product used as a concrete form
Steel deck - correct answer A safe working platform should be at least 12 feet wide
- correct answer Decking used as a work platform must provide 50psf for floors or 20 PDF for roofs
- correct answer A minimum of 1-1/2" of end bearing should be provided for deck. If deck is lapped it
should be over support
- correct answer Use #12 self drilling screws
- correct answer Weld washers are recommended for metal thickness less than 0.028" 22 gage
- correct answer Good weld 7/8 more of its perimeter working. Side welds not recommended for 22
gage
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller BukayoSaka120. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
81298 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now