Back Saw - A saw with very fine teeth and is often used in a miter box for cutting angles. The thin blade
is reinforced with a ridge of thicker metal along the back of the saw. It cannot cut deeper than the ridge.
Band Saw - A machine tool with endless blade that travels around two pulleys and is used to cut thin or
thick stock of wood in curve or straight form.
Beading Bit -
Belt Sander - A sanding machine on which the abrasive coating is on an endless belt running over
pulleys.
Bench Ruler - A tool commonly found on the work bench, which is usually longer than 12 inches.
Block Plane - Smoothing edges and making a bevelled edge.
Bow - Defect where the board bends at the center and vertically and is not a straight board.
Brad Point Bit -
Casing Nails - Are used for nailing window and door casing. They have a slightly larger head than finish
nails for better holding power.
Chamfer Bit -
Chisel - An edge tool with a flat steel blade with a cutting edge.
, Circular Saw - These saws necessarily differ somewhat from straight blade forms. Because they must be
relatively larger in comparison with the work, only the sizes up to about 1 inches in diameter have teeth
that are cut into the disk.
Coping Saw - Type of handsaw that's used to cut curved lines or shapes.
Countersink - A conical-shaped recess around a hole, often used to receive a tapered screw.
Countersink Drill Bit -
Cove Bit -
Crook - A defect in the board that bends the board horizontally in the center.
Crosscut Saw - A cutting tool; type of handsaw that cuts AGAINST the grain of the wood; the shape of
the teeth and the angle in which they're set are the main differences in this type of saw.
Cup - A defect where the sides of the board curve up.
Dovetail Saw - Used for small and accurate work such as dovetail joints.
Finish Nails - Have small heads and are driven below the wood surface with a nail set. Are used for
attaching trim and moldings to walls.
Flat Head Screw -
Forstner Bit -
Framing Square - Tool is a large L shape that is used for checking/drawing 90 degree angles in
construction. Also creating them.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller VasilyKichigin. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.48. You're not tied to anything after your purchase.