NFPA 96 Exam Questions Correctly Answered & Updated.
4.2.1 Where enclosures are not required, what are the clearance requirements? - CORRECT ANSWER 18" to Combustible
3" to limited-combustible
0" to non-combustible
4.1.8 All interior surfaces of the system shall be accessible for what? - ...
4.2.1 Where enclosures are not required, what are the clearance requirements? - CORRECT ANSWER 18"
to Combustible
3" to limited-combustible
0" to non-combustible
4.1.8 All interior surfaces of the system shall be accessible for what? - CORRECT ANSWER Cleaning and
Inspection
5.1.2 All seams, joints, and penetrations of the hood enclosure shall have a what in regards to their
construction? - CORRECT ANSWER liquidtight continous external weld to the hoods lower outermost
perimeter.
6.1.3 Mesh filters are ok on older hoods. - CORRECT ANSWER False
6.2.1.2 The lower edge of the filters in hoods above charbroilers must be what distance from the
charbroiler surface? - CORRECT ANSWER 4 ft minimum
6.2.1.1 The distance for filters to cooking surface on everything but charbroiler is? - CORRECT ANSWER
18" minimum but as far as possible.
5.3.4.3 What is the max temp for a fire damper activation? - CORRECT ANSWER 286 degrees F.
6.2.3.4 What is the minimum angle a filter can be installed? - CORRECT ANSWER 45 degrees from the
horizontal
6.2.4.3 What is max capacity for a grease drip tray under the filters? - CORRECT ANSWER 1 gallon
, 7.3.1 Openings for access panels shall be located where: - CORRECT ANSWER at the sides or top of duct.
Whichever is more accessible.
7.1.4 All ducts shall be installed without forming dips or traps that can collect grease. - CORRECT
ANSWER True
7.3.4 For hoods with dampers how close does an inspection panel need to be installed to the damper? -
CORRECT ANSWER 18"
7.3.7 Exhaust fans with ducts connected from both fans shall have access panels where? - CORRECT
ANSWER 3' or closer on each side of the fan
7.4.2.3 On nonlisted ductwork, the edge of the opening (for an access panel) shall be not less than ____
from all outside edges of the duct or welded seams? - CORRECT ANSWER 1.5"
7.4.3.1 Access panels shall be how thick? - CORRECT ANSWER same thickness and material of the duct.
7.4.3.2 What is the minimum temp rating for an access panel? - CORRECT ANSWER 1500 degrees (also
needs to be grease tight)
7.4.3.3 It is okay for access panel screws to penetrate the duct - CORRECT ANSWER False
7.5.1.1 How thick does the metal of ducts need to be? - CORRECT ANSWER 16 gauge steel or 18 gauge
SS
7.8.2.2 Fans shall be provided with: - CORRECT ANSWER safe access and a work surface for inspection
and cleaning
8.1.1.1 Approved upblast fans with motors surrounded by airstream shall be: - CORRECT ANSWER
Hinged, supplied with flexible weatherproof electrical cable and service hold-open retainers and listed
for this use.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Nursewendo. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $11.99. You're not tied to anything after your purchase.
