Exam (elaborations)
Boilermaker NCCR Test Questions and Answer (Correctly Solved Questions)
- Course
- Institution
Boilermaker NCCR Test Questions and Answer (Correctly Solved Questions)
[Show more]
Content preview
Boilermaker NCCR Test Questions andAnswer (Correctly Solved Questions)
When are steel chain slings recommended? - Correct
Answer ✅ When rigging from three points
A big control valve is pulled who is responsible for the
rigging? - Correct Answer ✅ Crane operator and rigger
What should be used to hold the pipe when setting up two
40-foot joints of 16-inch STD WT pipe? - Correct Answer ✅
4 legged roller top jacks
The hitch made by wrapping the sling around the load, then
passing one eye of the sling throughout a shackle is called? -
Correct Answer ✅ Choker Hitch
When should rigging material be attached to a bean that is
being demolished? - Correct Answer ✅ Before any bolts are
removed or any cutting is done on the beam.
Which of the following has a greater possibility of being a
respiratory hazard? - Correct Answer ✅ Asbestos
,Boilermaker NCCR Test Questions and
Answer (Correctly Solved Questions)
Which type of insulation is required before a vessel is
entered? - Correct Answer ✅ Locking, Tagging, and Blinding
lines that feed the vessel
According to OSHA, oxygen and acetylene cylinders in
storage must be separated at what minimum distance? -
Correct Answer ✅ 20 Ft
What is the first thing a boilermaker should do before cutting
into a tank or vessel? - Correct Answer ✅ Determine the
content
What tool is normally used to check the alignment on the
horizontal seams of the shell plates? - Correct Answer ✅ A
2-foot level
What is used to expand tubes inside mud and steam drums? -
Correct Answer ✅ Rolling motors and espanders
, Boilermaker NCCR Test Questions and
Answer (Correctly Solved Questions)
What does a grooved nut on an Acetylene rig indicate? -
Correct Answer ✅ The left hand thread is for acetylene use
only
Thermal beveling of pipe in preparation for welding requires
use of an? - Correct Answer ✅ Oxyfuel Torch
A 1-inch plate is to be cut. Why should an acetylene gerulator
on a cutting rig not be adjusted over 15 PSI? - Correct
Answer ✅ Acetylene is unstable above this pressure
What action should be taken if a boiler tube fails? - Correct
Answer ✅ Replace the failed tube
Before a wall burner is pulled for inspection - Correct
Answer ✅ The fuel gas valve must be shut
Which of the following is a type of insulation used inside
furnaces? - Correct Answer ✅ Fire Brick
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Allivia. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
67163 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now