Module 1,4,8 Basic Safety (Construction Site Safet
Module 1,4,8 Basic Safety (Construction Site Safet
Module 1,4,8 Basic Safety (Construction Site Safet
Exam (elaborations)
Module 1,4,8 Basic Safety (Construction Site Safety Orientation
6 views 0 purchase
Course
Module 1,4,8 Basic Safety (Construction Site Safet
Institution
Module 1,4,8 Basic Safety (Construction Site Safet
Module 1,4,8 Basic Safety (Construction Site Safety Orientation
1. Companies with strong safety cultures usually have lower ️turnover.
2. Which of these is a true statement regarding safety? ️Safety is a learned behavior and attitude.
3. Poor lighting, excessive noise, and inadequate guar...
Module 1,4,8 Basic Safety (Construction Site Safet
Module 1,4,8 Basic Safety (Construction Site Safet
Module 1,4,8 Basic Safety (Construction Site Safet
All documents for this subject (1)
Seller
Follow
bestscores1
Content preview
Module 1,4,8 Basic Safety (Construction Site Safety Orientation
1. Companies with strong safety cultures usually have lower ✔️turnover.
2. Which of these is a true statement regarding safety? ✔️Safety is a learned behavior and attitude.
3. Poor lighting, excessive noise, and inadequate guards for moving parts are examples of ✔️unsafe
conditions.
4. The activity that consists of breaking a job into its component tasks and then analyzing each step for
potential hazards is called a ✔️job safety analysis.
5. A measure of the probability, consequences, and exposure related to an event is referred to as
✔️Risk.
6. If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to
✔️cover the opening and label the cover.
7. The D-ring or support point on a safety harness should be placed ✔️between the shoulder blades.
8. A personal fall arrest system should be inspected monthly by a ✔️competent person.
9. Lanyards that have no shock-absorbing features are used for ✔️Positioning.
10. When placing a ladder against a platform or roof, the top of the ladder should extend above the
point where the ladder touches the platform or roof by at least ✔️3 feet (91 cm).
11. When performing overhead work on scaffolding, what protective measures must be taken to
prevent objects from falling and striking a person below? ✔️Toeboards, debris nets, or canopies must
be applied.
,12. When stacking materials such as bricks or block, do not stack materials beyond a ✔️4:1 height-to-
base ratio.
13. Benching systems are prohibited in ✔️Type C soils.
14. In the absence of other information, all soil in an excavation should be treated as if it is ✔️Type C.
15. Daily inspection of an excavation must be performed by a(n) ✔️competent person.
16. One of the most common grounding systems used for protection against accidental electrical shock
is the ✔️three-wire system.
17. A polarized electrical receptacle is used for ✔️double-insulated tools.
18. A system that protects workers from the release of hazardous energy while they work with machines
and equipment is referred to as ✔️lockout/tagout.
19. In a lockout/tagout situation, a personal lock and tag must be removed by ✔️the person who
applied them.
20. Hard hats should be made of fiberglass or ✔️reinforced plastic.
21. A good general rule about hearing protection is that it should be used if you must raise your voice
for someone to hear you when they are ✔️2 feet (61 cm) away.
22. When there is the potential to be exposed to asbestos, workers must ✔️report it to a supervisor
and avoid disturbing it.
, 23. The respirator that would be used where dust or solid particles might be inhaled is a ✔️half mask or
mouthpiece with a mechanical filter.
24. One source of lead on some job sites is _____. ✔️paint
25. Hepatitis can be caused by contact with _____. ✔️Blood
26. One of the symptoms of heat stroke is _____. ✔️extremely high body temperature
27. Which of the following conditions is considered life threatening? ✔️Heat stroke
28. When other workers are working near a welding operation, the standard practice is to _____.
✔️screen the work area with welding shields
29. What type of fire extinguisher would be used on an electric motor that has overheated and caught
fire? ✔️Class C
30. The type of permit that must be issued before a permit-required confined space can be accessed is
called a(n) _____. ✔️entry permit
When using power tools, never engage the_____. ✔️trigger lock
Before replacing parts such as bits, blades, or discs on any tool, you must_____. ✔️disconnect the
power source
Most hammer drills will not hammer until pressure is _____. ✔️applied to the drill bit
A pneumatic drill is commonly used _____. ✔️when there is no source of electricity
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller bestscores1. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.09. You're not tied to anything after your purchase.
