The amount of overlap that one part has with another
when assembled
A. interference
B. allowance
C. tolerance
D. limit dimensions Correct Answer A. interference
A(n) _________________sketch provides additional
written information to clarify the details of a design..
A. pictorial
B. isometric
C. annotated
D. perspective Correct Answer C. annotated
What technique would be used in sketching to increase
clarity and improve artistic appearance?
A. painting
B. detailing
,C. exploding
D. rendering Correct Answer C. exploding
Two points that share the same location on a 2D sketch
are said to be______________.
A. coincident
B. collinear
C. concentric
D. coplanar Correct Answer A. coincident
Study the graphic below and answer the following
question.
What are the relative coordinates of POINT B with respect
to Point A?
A. (3,5)
B. (3,2)
C. (2,3)
D. (5,3) Correct Answer C. (2,3)
__________ and/or dimensions are necessary to fully
constrain a sketch when creating solid models.
A. 2D geometric constraints
B. formulas
C. parameters
D. offsets Correct Answer A. 2D geometric constraints
9.25 yards is equivalent to
,A. 27 feet
B. 27.5 feet
C. 9 feet
D. 27.75 feet Correct Answer D. 27.75 feet
23,439 milliliters is equivalent to
A. 234.39 liters
B. 2.3439 liters
C. 23.439 liters
D. .023439 liters Correct Answer C. 23.439 liters
A private, non-profit organization that coordinates the
development and use of a voluntary consensus standards
in the United States.
A. American Society of Mechanical Engineers (ASME)
B. International Organization for Standardizations (IOS)
C. Occupational Safety and Hazard Association (OSHA)
D. American National Standards Institute (ANSI) Correct
Answer D. American National Standards Institute (ANSI)
A view that is used to show features that is located on an
inclined surface in true size and shape.
A. Detail View
B. Auxiliary View
C. Section View
D. Cutting Plane Line Correct Answer B. Auxiliary View
67.5 centimeters is equivalent to
, A. 171.45 inches
B. 26.57 inches
C. 100 inches
D. 2 feet Correct Answer B. 26.57 inches
A view that is used to show a magnified view of features
that are too small to adequately specify in another view.;
A. Detail View
B. Auxiliary View
C. Section View
D. Cutting Plane Line Correct Answer A. Detail View
Why is placement of your dimensions so important?
A. To reduce tolerance problems
B. To reduce confusion
C. It does not matter
D. None of the above Correct Answer B. To reduce
confusion
A graph of vertical bars representing the frequency
distribution of a set of data is called
A. bar graph
B. histogram
C. line graph
D. distribution graph Correct Answer B. histogram
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller TUTORWAC. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $22.99. You're not tied to anything after your purchase.
