AWS-CWI PART B TEST 1 EXAM 2024/2025 WITH 100% ACCURATE SOLUTIONS
9 views 0 purchase
Course
AWS-CWI
Institution
AWS-CWI
AWS-CWI PART B TEST 1 EXAM 2024/2025 WITH 100% ACCURATE SOLUTIONSThere is a weld that was bent outside the bend radius of the shoe and no fracture on the bend. what should be done when this is noted? - Precise Answer Cut another specimen from the original specimen and bend it.
All structural ste...
AWS-CWI PART B TEST 1 EXAM 2024/2025 WITH 100% ACCURATE SOLUTIONS
There is a weld that was bent outside the bend radius of the shoe and no fracture on the bend. what
should be done when this is noted? - Precise Answer ✔✔Cut another specimen from the original
specimen and bend it.
All structural steel fillet welds that has a "W" (width) of 1" or greater shall have no convexitity greater
than __________? - Precise Answer ✔✔3/16"
How should the weld reinforcement and backing be prepared prior to mechanical bending? - Precise
Answer ✔✔It shall be removed flush with the surface of the specimen.
which of the following conditions shall cause inadequate penetration (IP) to be considered a defect? -
Precise Answer ✔✔The length of an individual indication of IP exceeds 1 inch.
A welder was qualified in the 3G position, is he qualified to make a weld in the overhead position? -
Precise Answer ✔✔No, he is only qualified for the vertical, horizontal, and flat positions
Cracked welds shall be cut out unless the repair is authorized by the company. when a crack repair is
authorized for pipeline: - Precise Answer ✔✔A double repair of a crack is not permitted
what is the abbreviation for inside diameter? - Precise Answer ✔✔ID
What is the abbreviation for leak testing? - Precise Answer ✔✔LT
If a procedure qualification record is qualified on a plate test in the 3G position, does it qualify a welding
procedure specification in all positions? - Precise Answer ✔✔Yes, being as position is not listed as a
procedure qualification variable on table 8.
Arc burns on the parent metal shall not exceed ________ in length? - Precise Answer ✔✔never
accepted, regardless of their length
, What is an alternate term for weld face in the pipeline application? - Precise Answer ✔✔Crown surface.
When more than one welder is welding on the same test piece for qualification, failure of any portion of
a single test weldment for performance qualification constitutes failure for what. - Precise Answer
✔✔All processes used in the test, All welders in the test.
True or False: the number of filler and finish beads should allow the completed weld substitutionally
uniform cross section around the circumference of the pipe? - Precise Answer ✔✔True.
How much undertolerance are you allowed if the tensile specimen breaks in the base metal or fusion
zone? - Precise Answer ✔✔5%
True or False: The AWS Part B Book of Specifications contains requirements for welding operators and
tack welders? - Precise Answer ✔✔False
What is the preferred term for "arc strike" in pipeline applications? - Precise Answer ✔✔Arc burn
What is the abbreviation for welder qualification test record? - Precise Answer ✔✔WQTR
True or False: according to Clause 3 (Pipeline), cluster porosity shall be considered a defect if the
diameter of the cluster exceeds 1/2 inch? - Precise Answer ✔✔True
What statements is correct for base materials used in structural applications? - Precise Answer ✔✔the
depth of a mill induced discontinuity is the depth measured from the cut surface.
A pipeline bend specimen is tested on piping of a 6" nominal that is 3/16" thick. There is a fracture on
one of the bend specimens that is 1/8" in length. does this specimen pass or fail? - Precise Answer
✔✔Fails
What is the abbreviation for penetrant testing? - Precise Answer ✔✔PT.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller YANCHY. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $16.49. You're not tied to anything after your purchase.
