Unit 6 robot power up, jogging and initial setup,
Fanuc 3, FANUC Operation Certification
Questions With Complete Solutions
What startup method is used to initialize changes to systems
variables? Correct Answers Cold start
HH HH
What startup method is used to initialize changes to I/O setup?
Correct Answers Cold Start
HH HH
What startup method is used to install options and updates?
Correct Answers Controlled start
HH HH
What startup method is used to allow the programmer to set up
application specific information? Correct Answers controlled
HH HH
start
What startup method is used to do an image backup of the hard
drive? Correct Answers Boot Monitor start
HH HH
Which startup method is most commonly used? Correct
HH
Answers Cold start
HH
Why would the programmer want to depress the job speed key
and the shift simultaneously? Correct Answers jump to higher
HH HH
speeds
Why would a programmer not want to depress the jobs be key
and the shift key? Correct Answers To jump to lower speeds
HH HH
,What are the six coordinate systems? Correct Answers Joint,
HH HH
World, tool, user, jog frame, Path
Which coordinate systems are locked by the software and cannot
be changed? Correct Answers Joint and world
HH HH
In this jogging method each individual axis of the robot is going
to move one joint at a time. Which jogging method am I
describing? Correct Answers Joint mode
HH HH
The center of J1 perpendicular intersection of J2 axis is the
origin of what jogging method? Correct Answers World frame
HH HH
origin
What is the right-hand rule? Correct Answers Determine the
HH HH
different axis
Thumb + Z
Pointing finger + X
Middle finger + y
What keys can be depressed to access the position screen?
Correct Answers Position screen
HH HH
The position screen displays positional information in joint
angles or Correct Answers Cartesian coordinates
HH HH
When is the position of data updated? Correct Answers
HH
Continuously when the robot moves
HH
What coordinate system only displays positional information in
joint angles? Correct Answers Joint
HH HH
, Why would the programmer want to set up robot axis limits?
Correct Answers Restrict movements to prevent damage to
HH HH
equipment and humans
If a robot display the screen and it stated that items were listed
in group numbers how would you know that your robot was
program to perform those functions? Correct Answers Group
HH HH
number start with the number one and can have multiple groups
if there is a zero the robot does not have a group
When you program new information what needs to be done to
be able to use this new information? Correct Answers Restart
HH HH
What is an operation performed to associate the angle of each
robot axis with the post count value supplied from the absolute
pulsecoder connected to the corresponding axis motor. CorrectHH
Answers Mastering
HH
What did the manufacturers of the robot do to the robot arm to
aid the programmer in calibration? Correct Answers They
HH HH
placed a scale and witness marks at zero degrees
Since mastering is not necessary to be performed daily when
must it be performed? Correct Answers Motor, pulsecoder,
HH HH
reducer, cable or batteries replacement
What direction does the robot move in Z+ ? Correct Answers
HH
Up
HH
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Classroom. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
