100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Diesel Tech Suspension and Steering ASE Exam Practice Test 6 Updated 2024/2025 Questions and Answers 100% Correct. $7.99   Add to cart

Exam (elaborations)

Diesel Tech Suspension and Steering ASE Exam Practice Test 6 Updated 2024/2025 Questions and Answers 100% Correct.

 2 views  0 purchase
  • Course
  • Diesel Tech Suspension and Steering ASE
  • Institution
  • Diesel Tech Suspension And Steering ASE

Steering wheel shimmy at high speeds may be caused by: A. Too much positive caster B. Out-of-balance wheel and tire assemblies C. Air in the steering system D. Low tire pressure - B. Out-of-balance wheel and tire assemblies Load distribution is being discussed. Technician A says that if the fi...

[Show more]

Preview 2 out of 12  pages

  • August 13, 2024
  • 12
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • Diesel Tech Suspension and Steering ASE
  • Diesel Tech Suspension and Steering ASE
avatar-seller
ACADEMICMATERIALS
Diesel Tech Suspension and Steering
ASE Exam Practice Test 6

Steering wheel shimmy at high speeds may be caused by:

A. Too much positive caster

B. Out-of-balance wheel and tire assemblies

C. Air in the steering system

D. Low tire pressure - B. Out-of-balance wheel and tire assemblies



Load distribution is being discussed. Technician A says that if the fifth wheel is too far ahead, more
weight is transferred to the steer axle increasing steering effort. technician B says if the fifth wheel is too
far rearward, not enough weight will be transferred to the steer axle causing steering instability. Who is
correct?

A. A only

B. B only

C. Both A and B

D. Neither A nor b - C. Both A and B



When checking the end-play measurement on a PreSet hub, the tip of the dial indicator should be placed
on the hub cap flange or axle mounting flange, and the magnetic base of the dial indicator should be
mounted on the hub's:

A. Spindle end

B. Hub cap

C. Wheel hop or tramp

D. Wheel shimmy - A. Spindle end



An improperly adjusted air suspension ride height can cause:

A. Damaging driveline angles

B. A hissing noise during compressor operation

, C. Back pressure in the supply line

D. A leak, causing intermittent operation - A. Damaging driveline angles



What is the LEAST LIKELY advantage for the use of sliding fifth wheel assemblies on over-the-road
equipment?

A. Weight-over-axle on the tractor may be altered

B. Weight-over-axle on the trailer may be altered

C. The trailer bridge formula may be altered

D. It allows for the use of a rigid-mount fifth wheel - D. It allows for the use of a rigid-mount fifth
wheel



All of the following conditions may cause steering wander or pull EXCEPT:

A. Improper rear-axle alignment

B. Loose steering gear

C. Excessive positive caster

D. Worn kingpin bushings - C. Excessive positive caster



When adjusting front-wheel camber:

A. If the front wheel has a positive camber angle, the camber line is tilted inward from the tire vertical
centerline of the wheel and tire

B. Excessive positive camber on a front wheel causes premature wear on the inside edge of the tire tread

C. The vehicle will lead to the side that has the most negative camber

D. If the camber angle is out of specification, this may be caused by worn suspension components -
C. The vehicle will lead to the side that has the most negative camber



Technician A says some abnormal tire wear conditions are normal for certain design tires. Technician B
says the TMC Radial Tire conditions Analysis Guide or Manufacturers Tread Wear Reference Guide should
be used to determine tire wear pattern conditions. Who is correct?

A. A only

B. B only

C. Both A and B

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller ACADEMICMATERIALS. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $7.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

76710 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$7.99
  • (0)
  Add to cart