Mechanic Test Review Questions and Complete Solutions Graded A+
11 views 0 purchase
Course
Mechanics NEIEP
Institution
Mechanics NEIEP
1. What is the overlap minimum on 2 and 3 speed doors? Answer: horizontal - 1/2" vertical - 1"
2. what are the minimum and maximum clearances between sill and car doors? Answer: 1/4" Minimum
3/8" Maximum
3. What is the minimum and maximum sill to sill gap? Answer: 1/2"- 1 1/2"
4. 1 gallon eq...
Mechanic Test Review
Questions and
Complete Solutions
Graded A+
Denning Muriithi [Date] [Course title]
, mechanic test review
1. What is the overlap minimum on 2 and 3 speed doors? Answer:
horizontal - 1/2" vertical - 1"
2. what are the minimum and maximum clearances between sill and
car doors? Answer: 1/4" Minimum
3/8" Maximum
3. What is the minimum and maximum sill to sill gap? Answer: 1/2"- 1 1/2"
4. 1 gallon equals how many cubic feet? Answer: .134 cubic feet
5. how many gallons are needed to run a plunger 30'? Answer: Convert 30'
into inches
= 360"
3x3x3.14=28.
26
28.26x360=10,173.6
10,173.6/231=44.04 gallons
6. what is the conversion for Kg to pounds? Answer: 1 Kg = 2.205 pounds
7. what is the purpose of a gear reduction unit on a geared machine?
Answer: In- creased lifting capacity
8. At what speed should the Gov. switch be set to open? Answer:
Electrical - 90% of tripping speed for 150 -500 fpm.
95% for anything over 500 fpm.
9. at what distance from closed does the gate switch operate? Answer: 2"
10.What are the most common features of Load weigh? Answer: Control
the generator field and inside express operation
11.does a GFCI work? Answer: Detects imbalance between hot and
neutral wires
12.A motor needs a sleeve bearing replaced, what type of bearing do
you need? Answer: Friction Bearing
(anti-friction bearing = ball bearing)
13.Using binary logic, What dip switches must be on for a 128 bit 30
second timer at 150%? Answer: 1,3,4,6 = 45 seconds
14.How do you attach brackets to brick? Answer: Inserts set back 1/4'
into the block. code could call for through bolt.
15. A car weighs 2500 pounds with a capacity of 2500 pounds. The CWT is
weighted at 40% how much is the motor lifting when the car is fully
loaded?-
Answer: 2500(car)+1000(40%)=3500
5000-3500=1500 pounds lifted by the machine.
16. what are the consequences of misaligned joints on a rack and pinion?
Answer: -
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller YourExamplug. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.49. You're not tied to anything after your purchase.
