CDX - Safety and Foundation Comprehensive Exam And Answers(Revised And Updated).
22 views 0 purchase
Course
Basic Vehicle Technologies
Institution
Basic Vehicle Technologies
Henry Ford's _____ approach made assembly much more efficient, increasing the number of vehicles that could be built in a shift and thereby lowering production costs. - Answer Assembly line
Tech A says that the production of vehicles today requires a mix of robotic and human assembly. Tech B ...
CDX - Safety and Foundation
Comprehensive Exam And
Answers(Revised And Updated).
Henry Ford's _____ approach made assembly much more efficient, increasing the number of vehicles
that could be built in a shift and thereby lowering production costs. - Answer Assembly line
Tech A says that the production of vehicles today requires a mix of robotic and human assembly. Tech B
says that most of the parts on a vehicle are preassembled into unit assemblies before they reach the
assembly line. Who is correct? - Answer Both A and B
Heavy line technicians must be able to research service information and use the information to help
determine the cause of the problem and make the appropriate repairs. - Answer True
Which of the following can be considered a franchise? - Answer Goodyear, AAMCO, Jiffy Lube
Traditionally, a coupe has two standard seats in front, and possibly two smaller seats behind. - Answer
True
A _____ is an underlying supporting structure for vehicles. - Answer Chassis
Which of the following typically happens when cranking a gasoline engine that uses a computer control
engine management system? - Answer Engine sensors are monitored; timing is adjusted; injectors are
adjusted
The drive type that is becoming increasingly popular is all-wheel drive (AWD), with all four wheels driven
by the engine all the time. - Answer True.
Which of the following is NOT a common angle between the banks of cylinders in an engine
configuration? - Answer 25 degrees
,Axles come in two configurations: _____. - Answer Live axle and dead axle
Technician A states that the transfer case controls the drive to the front and rear axles. Technician B
states that transfer cases always allow the driver to select 2WD or 4WD. Who is correct? - Answer Tech
A
Tech A says that both OSHA and the EPA can inspect facilities for violations. Tech B says that a shop safety
rule does not have to be reviewed once put in place. Who is correct? - Answer Tech A
The best way to get rid of exhaust gases is in a soundproof room. - Answer False
When disposing of used liquids: - Answer Petroleum products can be mixed together.
Which of the following should be inspected during a shop safety inspection? - Answer Faulty or unsafe
equipment or tools; clutter, spills, unsafe shop practices; items blocking emergency exits or walkways
Disposable dusk masks should not be used when working around asbestos dust for all of the following
reasons EXCEPT: - Answer Asbestos dust is harmless.
The most common type of eye protection is a _____, which must be marked with "Z87.1" on the lens
and frame. - Answer Pair of safety glasses.
Which of the following is NOT a question you should ask yourself as you prepare to be as safe as
possible? - Answer How can I finish this task as fast as possible?
If a foreign object is in the eye, irrigate from the nose side of the eye toward the outside to avoid
flushing material into the other eye. - Answer True
The owner's manual contains all of the following details EXCEPT: - Answer engine removal procedures.
Before working on a vehicle, it is good practice to check whether a TSB has been issued for that vehicle
and type of fault or repair. - Answer True
, Labor guides are only available in print. - Answer False
To use a parts program, you need to have a _____ understanding of how to start and use a computer. -
Answer Basic
The _____ label lists a diagram of the serpentine belt routing for the engine accessories. - Answer Belt
routing
Some tools are _____ or awkward to use, so seek assistance if required and use correct manual handling
techniques when using tools. - Answer Heavy
Technician A says that lockout/tag-out is a safety procedure for a safe working environment. Technician B
says that lockout is designed to secure a vehicle after all work on it has been completed. Who is correct?
- Answer Technician A
Specialized manufacturer tools are shared by everyone in the shop. Technician A says that it is critical
that they are inspected for damage. Technician B says that they should be put in their proper storage
space after each use. Who is correct? - Answer Both A and B
A steel hammer might mark or damage the part being struck, especially if that part is made of a softer
metal, such as aluminum. - Answer True
Chassis dynamometers are very useful for all of the following, EXCEPT: - Answer diagnosing suspension
concerns.
Technician A says that anti-seize compound is a type of thread-locking compound. Technician B says that
thread-locking compounds act like a very strong glue. Who is correct? - Answer Technician B
The operating capacity of lifting equipment is usually expressed as the _____. - Answer Safe working
load (SWL)
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller TestSolver9. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.19. You're not tied to anything after your purchase.
