Examen
EPA 608 TYPE III SAMPLE TEST QUESTIONS AND ANSWERS
- Cours
- Établissement
EPA 608 TYPE III SAMPLE TEST QUESTIONS AND ANSWERS
[Montrer plus]
Aperçu du contenu
EPA 608 TYPE III SAMPLE TESTQUESTIONS AND ANSWERS
Where do leaks commonly occur in low pressure systems?
a. Evaporator
b. Condenser
c. Purge unit
d. Gaskets or fittings - Answer-d. Gaskets or fittings
Where do leaks commonly occur in open-drive type compressor systems?
a. Evaporator
b. Condenser
c. Shaft seal
d. Cooling tower - Answer-c. Shaft seal
Does refrigerant go out of the system in low pressure systems or does air and
moisture go in?
a. Refrigerant escapes through low pressure leaks.
b. Air and moisture enter the refrigeration system because it operates
in a vacuum
c. Refrigerant leaks out through shaft seals and gaskets. - Answer-b. Air and moisture
enter the refrigeration system because it operates
in a vacuum
When should a low pressure system be leak checked according to ASHRAE
guideline 3-1996?
a. There are specific recommendations.
b. During pressure checks
c. When the system rises from 1 mm Hg to a level above 2.5 mm Hg
during vacuum testing
d. Leak check every year - Answer-c. When the system rises from 1 mm Hg to a level
above 2.5 mm Hg during vacuum testing
What does a purge unit do and what is a high efficiency purge unit?
a. Removes the refrigerant from the system. High efficiency purge system
will expel large quantities of refrigerant
b. Removes the refrigerant from the system. High efficiency purge system
will expel very little refrigerant
c. Removes the oil from the system. High efficiency purge system will expel
very little refrigerant
d. Removes the air from the system. High efficiency purge system will
expel very little refrigerant - Answer-d. Removes the air from the system. High efficiency
purge system will
expel very little refrigerant
, How does a centrifugal compressor purge unit work?
a. Takes its suction from the top of the evaporator, removes the air from the
system, and returns the refrigerant to the evaporator
b. Takes its suction from the top of the chiller barrel, removes the air from the
system, and returns the refrigerant to the evaporator
c. Takes its suction from the top of the compressor suction, removes the air
from the system, and returns the refrigerant to the evaporator
d. Takes its suction from the top of the condenser, removes the air
from the system, and returns the refrigerant to the evaporator - Answer-d. Takes its
suction from the top of the condenser, removes the air
from the system, and returns the refrigerant to the evaporator
What are visible ways to check for leaks in a low pressure system?
a. Excessive running of a purge system.
b. Continuous excessive moisture in the purge unit could indicate a leak in
the condenser or the chiller barrel.
c. High head pressure
d. All the above - Answer-d. All the above
What needs to be done to leak check a low pressure system?
a. Increase the pressure in the system by the use of nitrogen
b. Increase the pressure in the system by the use of oxygen
c. Increase the pressure in the system by the use of controlled hot
water or heater blankets
d. Increase the pressure in the system by the use of boiler hot water - Answer-c.
Increase the pressure in the system by the use of controlled hot
water or heater blankets
What are ways you can increase the pressure in the system?
a. controlled hot water
b. heater blankets
c. a and b
d. None of the above - Answer-c. a and b
What can happen if you exceed 10 psig while pressurizing the system?
a. Shaft seals will fail
b. The rupture disc will fail
c. Oxygen combined with oil in the system will explode
d. None of the above - Answer-b. The rupture disc will fail
How should a water box be leak tested?
a. Remove water, then place the leak detector probe in through the
drain valve
b. Remove water, pressurize and check with a gas detector
c. Look for bubble in the water
Les avantages d'acheter des résumés chez Stuvia:
Qualité garantie par les avis des clients
Les clients de Stuvia ont évalués plus de 700 000 résumés. C'est comme ça que vous savez que vous achetez les meilleurs documents.
L’achat facile et rapide
Vous pouvez payer rapidement avec iDeal, carte de crédit ou Stuvia-crédit pour les résumés. Il n'y a pas d'adhésion nécessaire.
Focus sur l’essentiel
Vos camarades écrivent eux-mêmes les notes d’étude, c’est pourquoi les documents sont toujours fiables et à jour. Cela garantit que vous arrivez rapidement au coeur du matériel.
Foire aux questions
Qu'est-ce que j'obtiens en achetant ce document ?
Vous obtenez un PDF, disponible immédiatement après votre achat. Le document acheté est accessible à tout moment, n'importe où et indéfiniment via votre profil.
Garantie de remboursement : comment ça marche ?
Notre garantie de satisfaction garantit que vous trouverez toujours un document d'étude qui vous convient. Vous remplissez un formulaire et notre équipe du service client s'occupe du reste.
Auprès de qui est-ce que j'achète ce résumé ?
Stuvia est une place de marché. Alors, vous n'achetez donc pas ce document chez nous, mais auprès du vendeur biggdreamer. Stuvia facilite les paiements au vendeur.
Est-ce que j'aurai un abonnement?
Non, vous n'achetez ce résumé que pour $14.49. Vous n'êtes lié à rien après votre achat.
Peut-on faire confiance à Stuvia ?
4.6 étoiles sur Google & Trustpilot (+1000 avis)
66579 résumés ont été vendus ces 30 derniers jours
Fondée en 2010, la référence pour acheter des résumés depuis déjà 14 ans
