Fanuc Exam Questions with All Correct Answers
speed and termination types are pasted in the proper instructions to maintain the original speed and termination of each path segment - Answer-F3 -- RM-POS-ID
will add lines exactly as they were copied and renumbers the copied positions with the ne...
speed and termination types are pasted in the proper instructions to maintain the
original speed and termination of each path segment - Answer-F3 -- RM-POS-ID
will add lines exactly as they were copied and renumbers the copied positions with the
next available position number - Answer-F4 - POSITION
will add the lines exactly as they were copied, but leaves the position numbers blank -
Answer-F2 - LOGIC
will add lines exactly as they were copied and retains the current position numbers -
Answer-F3 - POS ID
The renumber function reassigns all position numbers in the program so that they are in
sequential order. Renumbering changes the position ID, not the positional information. -
Answer-true
The following display is a direct or indirect addressing: R[3]=2 - Answer-direct
Position register element instruction allows you to change an individual value in a joint
or Cartesian position. - Answer-true
When a CALL statement branches from the main program that executes the entire
program, you must insert another CALL statement to return back to the main program. -
Answer-false
Timers must start and end in the same program - Answer-false
When inserting a program instruction, you must highlight either a line number or END. -
Answer-true
An analog I/O signal is an input or output voltage that has a value within the range of
the I/O board or module that is being used. - Answer-true
When group output binary is set to 7, what DO[#]'s will be switched on?
DO[1] = 1 DO[2] = 2 DO[3] = 4 D0[4] = 8 DO[5] = 16 - Answer-1, 2, 3
Which I/O is used when using the EE connector on the robot? - Answer-robot
, The status line describes the current status of the I/O. When the status displays
PENDING, this means: - Answer-the assignment is valid, but not active
How many user frames are standard on the R-J3 series controller? - Answer-9
What are the three methods used to define a RTCP frame? - Answer-3 point, 4 point
and direct entry method
What is the default location of the tool center point? - Answer-at the center of the
faceplate
What are the 3 methods used to define a tool frame. - Answer-3, 6, and direct entry
method
all methods that a Jog Frame can be taught. - Answer-3 point method, direct entry
How many jog frames are standard on the R-J3 series controller? - Answer-5
For simulation to pickup and drop a part: - Answer-You must place a check in the "Allow
part to be picked" and in the "Allow part to be placed" found within the Fixture
Simulation tab.
To create an AVI file: - Answer-Click on the Record button within the icon bar.
To run and view a program from beginning to end utilizing the EOAT pick and place a
part: - Answer-Click on Cycle Start within the icon bar.
To create a simulated program: - Answer-A. From the Teach menu select "Add
Simulation Program".
B. From the Process Navigator within the Teach TP Programs, select Add a TP
Program.
C. Within the Cell Browser, right click on Programs and select Add Simulation Program.
To remove a Fixture - Answer-A. Click to select the Fixture within the Cell and from the
keyboard press Delete.
B. Within the Cell Browser, right click on the Fixture name, then select Delete Fixture.
C. From the Edit menu, select remove Fixture
To display the contents of a Device, you must Generate a Directory. - Answer-True
Teach Pendant programs can be loaded from the FILE menu and one other menu.
What is the other screen? - Answer-Select menu
If you are saving files to a disk, you must set the default device. Which of the following
menu items would you find this? - Answer-FILE/UTILITIES
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Perfectscorer. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.49. You're not tied to anything after your purchase.
