Network Pro CH1-10 | Questions And Answers Latest {2024- 2025} A+ Graded | 100%
Verified
An access point that conforms to the IEEE 802.11b standard acts most closely to what other networking
device? - Hub
All of the 802.11 standards for the wireless networking support which type of communication path
sharing technology? - CSMA/CA
Uses a narrow frequency band and hops data signals in a predictable sequence - FHHS
Breaks data into pieces and ends the pieces access multiple frequencies in a defined range - DSSS
Breaks data into very small data streams in order to send the information across long distances - OFDM
Which of the following is true of a wireless network SSID? - Groups wireless devices together into the
same logical network
Which wireless networking component is used to correct multiple APs together? - DS
Which IEEE standard describes wireless communications? - 802.11b
Which data transmutation rate is defined by the IEEE 802.11b wireless standard. - 11Mbps
You are designing a wireless network for a client. Your client needs the network to support a data rate of
at least 54Mbps. In addition, the client already has a wireless telephone system installed that operates
2.4GHz. Which 802.11 stand will work best in this situation? - 802.11a
You are designing an update to your clients wireless network. The existing network uses 802.11b. Due to
budget, which 802.11 standard will work best. - 802.11g
,Which IEEE wireless standard specify transmission speeds up to 54Mbps? select two - 802.11a
802.11g
You have been contacted by OsCorp to recommend a wireless solution. - 802.11g
Which of the following are frequencies defined by 802.11 committees for wireless networking. select
two - 2.4GHz
5.57GHz
Which technologies are used by the 802.11ac standard to increase network bandwidth? select two -
Eight MIMO radio streams
80MHz donned channels
Your organization uses an 802.11b wireless network. Recently other tenets installed the following
equipment in your building.... - The wireless tv system
What is the frequency of 802.11a networking? - 5.75GHz
How many total channels are available for 802.11a wireless networks? - 23
How many total channels are available for 802.11g wireless networks? - 11
Which wireless technology is used to enable 802.11a-ht and 802.11g-ht networks to emulate 802.11n
network speeds? - Channel bonding
You are configuring a wireless network with two wireless access points. Both access points connect to
the same wired network. You want wireless users to be able to connect to either access point, and to be
able to roam between the two access points. How should you configure the access points? - Same SSID,
different channel.
,You have configured a wireless access point to create a small network. You have configured all necessary
parameters. Wireless clients seem to take a long time to find the wireless access point. You want to
reduce the time it takes for the clients to connect. What should you do? - Decrease the beacon interval.
You have configured a wireless access point to create a small network. For security, you have disabled
SSID broadcast. From a client computer, you try to browse to find the access point. You see some other
wireless networks in the area, but cannot see your network to connect to it. What should you do? -
Configure a profile on the wireless client.
You have a small wireless network that uses multiple access points. The network currently uses WPA.
You want to connect a laptop computer to the wireless network. Which of the following parameters will
you need to configure on the laptop? - TKIP encryption
Preshared key
You are building a wireless network within and between two buildings. The buildings are separated by
more then 3000 feet. The wireless network should meet the following requirements.... - Building 1-
location A
Right-facing directional Antenna/WPA2 with CCMP
Building 1-location B
Omni directional Antenna/WPA2 with CCMP
Building 1-location C
Left-facing directional Antenna/WPA2 with CCMP
Building 1-location D
Right-Facing Parabolic Antenna/WPA2 with CCMP
Building 2-location A
Omni Directional/WEP with Open authentication
Building 2-location B
Left-facing Parabolic Antenna/WPA2 with CCMP
Your wireless network consist of multiple wireless 802.11n access points that are configured as
follows.....This network is required to support an ever-increasing number of devices. what should you
do? - Double the bandwidth assigned per channel to 40MHz
, What purpose does a wireless site survey serve? select two - To Identify existing or potential sources of
interference
To identify the coverage area and preferred placement of access points.
You are designing a wireless network for a client. Your client needs the network to support data rate of
at least 150Mbps. In addition, the client already has a wireless telephone system installed that operates
2.4GHz. Which 802.11 standard will work best in this situation? - 802.11n
You are designing a wireless network for a client. Your client needs the network to support a data rate of
at least 54Mbps. Which 802.11 standard will work best in this situation? select two - 802.11n
802.11a
You are designing an update to your clients wireless network. The existing wireless network uses
802.11g equipment, which your client complains runs to slowly. She wants to upgrade the network to
run 150Mbps or faster. Which 802.11 standard will work best in this situation. - 802.11n
You have been hired to design a wireless network for a SOHO environment. Which of the following
questions should you ask? select three - How many devices will need to be supported
Is the business expected to grow in size in the future
What type of data will be transmitted on the network
To optimize your network, you want to configure your wireless AP to use a channel that meets the
following criteria. non-overlapping, low utilization, low interference. - channel 1
Match each wireless term or concept on the left with its associated description on the right - Compares
the level of the WIFI signal to the level of background radio signals/ Signal to Noise ratio
Checks channel utilization and identifies sources of RF inference/ Spectrum analysis
Identifies how strong a radio signal is at the receiver/Received Signal Level
Identifies the number of useful bits delivered from the senders to the receiver/
Causes multiple copies of the same radio signal to be received by the receiving antenna/ Bounce
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller oneclass. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.48. You're not tied to anything after your purchase.