ACI Concrete Field Testing Technician- Grade I 150 QUESTIONS AND ANSWER
5 views 0 purchase
Course
KAPLAN MED-SURG 4
Institution
KAPLAN MED-SURG 4
ACI Concrete Field Testing Technician- Grade I 150 QUESTIONS AND ANSWER ACI Concrete Field Testing Technician- Grade I 150 QUESTIONS AND ANSWER ACI Concrete Field Testing Technician- Grade I 150 QUESTIONS AND ANSWER
ACI Concrete Field Testing
Technician- Grade I 150
QUESTIONS AND ANSWER
1. The sensor of the temperature measuring device shall be submerged a
minimum of _____ in. [_____mm] into the freshly mixed concrete.: 3 in. [75
mm]
2. The temperature measuring device shall have a capacity of measuring
temperature of freshly mixed concrete to +- _____ degrees F [+- _____ C]
throughout a range of _____.: 1 degree F [0.5 C], 30 degrees F to 120 F [0 C to
50 C]
3. The temperature measuring device shall be calibrated _____, or
whenever there is a question of _____.: Annually, accuracy
4. The temperature of concrete may be measured in a wheelbarrow. True or
False?: True
5. The temperature of concrete may be measured in a wall form. True of
False: True
6. A composite sample of concrete is required even if the only purpose for
obtaining the sample is to determine temperature. True of False?: False 7.
What must be done to the sample container prior to sampling the concrete?:
Dampen (with water)
8. What must be done to the concrete surrounding the temperature measuring
device after the device is submerged in the fresh concrete.: Gently press the
concrete around the temperature measuring device at the surface of the concrete
, .
9. How long must the temperature measuring device remain in the
freshly mixed concrete?: At least 2 minutes but not more than 5 minutes
10. After the temperature of the concrete is read, what is required?: Reporting
of temperature
11. The temperature of concrete is reported to the nearest _____ degrees F
[_____ C]: 1 degree F [0.5 C]
12. According to ASTM C1064, what is one reason to take the temperature of
concrete?: Verify conformance to a specified requirement for temperature of
concrete
13. A maximum temperature of freshly mixed concrete is specified in ASTM
C1064. True of False?: False
14. The sample of concrete used for temperature determination must be
rodded 25 times. True or False?: False
15. Sampling by this method is required when tests are to be made to
determine _____ with specification requirements.: Compliance
16. This method covers sampling from four types of mixtures which are
_____, _____, _____, and _____.: Stationary mixers, paving mixers, revolving
drum mixers, and open top mixers
17. The maximum allowable time between obtaining the first and final portions
of a composite sample is _____ minutes.: 15
, .
18 Portions of a composite sample shall be thoroughly remixed bfore
beginning tests on the sample. True of False?: True
19. The maximum elapsed time allowed between obtaining the final portion
of the composite sample and beginning the tests for slump, temperature, and
air content is _____ minutes.: 5
20. The molding of strength test specimens shall begin within _____ minutes
after fabricating the composite sample.: 15
21. The concrete sample must be protected from contamination and _____.:
Rapid evaporation
22. The minimum size sample for making strength test specimens is _____.:
28 L (1ft^3)
23. When sampling from a stationary mixer, the batch must be sampled at
_____ or more regularly spaced intervals during discharge of the middle
portion of the batch: 2
24. The composite sample for a paving mixer must represent a minimum of
_____ different portions of the batch of concrete taken from the pile after
discharge.: 5
25. When sampling from a revolving drum truck mixer, concrete must be
sampled at a minimum of _____ regularly spaced intervals during discharge
of the middle portion of this batch.: 2
26. Concrete samples from a truck mixer must be obtained before any water
or admixtures are added to the mixer at the job site. True or False?: False 27.
The composite samples from a truck mixer must be obtained from the
_____ portion of the batch.: Middle
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Drtopscorer. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $17.99. You're not tied to anything after your purchase.
