Exam (elaborations)
API 570 RECERT QUESTIONS AND ANSWERS graded A+ 2024/2025
- Course
- Institution
API 570 RECERT QUESTIONS AND ANSWERS graded A+ 2024/2025
[Show more]
Seller
Follow
Content preview
API 570 RECERT QUESTIONS ANDANSWERS
External visual inspection intervals can be established by using: - ANSAPI RP 580
The following is not considered an acceptable
non-welding repair: - ANSA glued patch
Identfying integrity operating envelopes for key process variables is an important adjunct for:
- ANSRisk-based inspection
A corrosion specialist is: - ANSA person acceptable to the owner/user who is knowledgeable
and experienced in the specific process chemistry and corrosion mechanisms
The required thickness of a pipe shall be: - ANSThe pressure design thickness without
corrosion allowance
For in-service weldments: - ANSIt may not be appropriate to use the original construction
code radiography acceptance criteria
Nonmetallic composite pipe wraps: - ANSmay be used for temporary repairs of locally
thinned areas of piping
How do you evaluate the effects of fire damage on a piping system - ANSUtilizing API 579
Fitness for Service
Structural minimum thickness is the: - ANSminimum thickness based on design code
calculations for pressure without corrosion allowance
An item that is not in accordance with specified codes, standards or other requirements is
known as: - ANSnon-conformance
For high temperature thickness measurements, what is the most important component of the
thickness testing equipment? - ANSThe search unit
During pressure testing, owner/users are cautioned not to exceed what value for materials
that may be used in elevated temperature service? - ANS90% of SMYS
In accordance with API 570, NDE examinations shall be scheduled at intervals that consider
the: - ANSType of damage and rate of progression
How can laminar inclusions affect thickness readings in digital ultrasonic instruments? -
ANSBy creating an interface that reflects the signal before it reaches the back wall
, Per API 570, which of the following is an a example of subsurface cracking? -
ANShydrogen-induced cracking
Above what temperature should appropriate temperature correction factors be applied to
ultrasonic thickness measurements? - ANS150 degrees F (65 degrees celcius)
According to API 570, when developing an inspection plan, the methods and extent of NDE:
- ANSshall be evaluated to assure they can adequately identify the damage mechanisms
The best search units for conducting corrosion evaluation are: - ANSDual-element
transducers
A methodology whereby flaws and conditions contained within piping systems are assessed
in order to determine the structural integrity of the piping for continued service is referred to
as: - ANSFitness for service evaluation
A complex listing and description of piping damage mechanisms experienced in the refining
industry is included in: - ANSAPI RP 571
For testing of Category D piping sytems, ASME B 31.3 limits the gauge pressure to be used
for testing to: - ANSMax design pressure
Which of the following standards provides guidance for the visual examination of FRP
components during initial manufacturing and assembly? - ANSASTM D5263
How often should each owner/user organization be audited to determine the authorized
inspection agency is meeting the requirements of API 570? - ANSPeriodically
What is the pressure design thickness of a piping system? - ANSMinimum thickness without
corrosion allowance based on design code calculations for pressure
In a SMAW 6010 electrode, the "1" refers to: - ANSwelding position
When an inspector discovers some field welds that were made by an unqualified welder,
what does API 577 recommend as the first action of the inspector? - ANSQuarantine all
improper weldments
The purpose of reviewing the welder performance qualification (WPQ) is to: - ANSVerify that
welders are qualified to perform the welding given its position and process
One of the advantages of using the spray transfer mode when performing GMAW welding is:
- ANSspatter is negligible
Which of the following techniques is specifically cited by API RP 577 as having special
limitations due to concerns for incomplete fusion? - ANSGMAW-Short circuiting transfer
For purposes of evaluating in-service damage of pressure retaining components, API-570
recognizes: - ANSFitness for service concepts
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Qualityexam. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
73314 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now