Exam (elaborations)
NCCER MILLWRIGHT PRACTICE EXAM 2 Questions 2024
- Course
- Institution
NCCER MILLWRIGHT PRACTICE EXAM 2 Questions 2024
[Show more]
Content preview
NCCER MILLWRIGHT PRACTICE EXAM 2Questions 2024
If the seal was not properly aligned or there is excessive wear
in some bearing or shaft,_______ wear tracks will be the
indicator - Correct Answer ✅unusual
For removing hard to remove gasket materials found on
sealing surfaces, ______ is recommended - Correct Answer
✅sharpened brass putty knife
Apprenticeship training is_______ - Correct Answer
✅Conducted on the job
Charting alignment on a graph requires a chart that is divided
into thousandths of an inch vertically for the indicator
readings and into whole inches horizontally for the__________ -
Correct Answer ✅distance
The orthographic drawing may contain a dashed or _______
line - Correct Answer ✅hidden
,NCCER MILLWRIGHT PRACTICE EXAM 2
Questions 2024
In order to shoot through a test object and project an image
onto a detector or a sheet of film, radiography uses a source
of penetrating called _______ - Correct Answer ✅Radiation
Which of the following task would you not perform with
dividers? - Correct Answer ✅*scribe circles
*transfer measurements
*compare distances
<measure angles
The over speed trip device is actuated when the turbine
reaches a predetermined limit usually _________% above
normal full-load speed - Correct Answer ✅10%
Positive results in an offset measurement mean that the
MTBM is _____ or on the 3-o'clock side. - Correct Answer
✅high
The coupling gap is set, and then the ______ is measured -
Correct Answer ✅offset misalignment
, NCCER MILLWRIGHT PRACTICE EXAM 2
Questions 2024
In a hydraulic system, movement depends on_____ - Correct
Answer ✅pressure
Fractional dimensions are used on objects such as _______ or
______ - Correct Answer ✅furniture or utility items
If the cause of the problem is not immediately understood,
the process of________is often the procedure of choice -
Correct Answer ✅elimination
When applying sealant to the sealing gland flanges, keep the
sealant away from the inside edges of the flange by at
least_______ inch - Correct Answer ✅3/16
A stroboscope is triggered by a_______ - Correct Answer
✅Transducer
The pitch of threaded fasteners is measured with a
________gauge - Correct Answer ✅thread
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Allivia. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
73091 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now