Who is the third party group that approves and endorses standards? Right
Ans - American National Standards Institute
What term is used to describe the documents written by members, or peers, in
the industry? Right Ans - Standards
A company's health, safety and environment policy should be a combination of
labor regulations and ? Right Ans - Industry standards
Where OSHA has not promulgated specific standards, who is responsible for
following the acts general clause? Right Ans - Employer
On a job site who should be involved in the JHA process? Right Ans - The
Whole Crew
What does the Term SOW stand for? Right Ans - Scope Of Work
The letters JHA stand for what ? Right Ans - Job Hazard Assessment
When using a extension ladder, how many feet past the platform must it
extend? Right Ans - 3
If you have a sixteen foot ladder leaning against a building wall, how many
feet from the wall does the case need to by to have the correct slope? Right
Ans - 4
Work boots with ankle support are recommended for all work sites? Right
Ans - True
What do the letters PPE stand for ? Right Ans - Personal Protective
Equipment
What does the ground fault circuit interrupter (GFCI) do? Right Ans -
Senses a short circuit, prevents electrocution , shuts off the flow of electricity
, Who is responsible for providing PPE? Right Ans - Employer
When using a y-lanyard attached to your back d-ring, at what height should
the connection to your anchorage be placed?extend? Right Ans - Shoulder
level or above
What is the maximum distance between the sternal d-ring and the fixed safety
climb? Right Ans - Nine inches
When calculating a fall distance using a "6 foot" energy absorbed, what is the
maximum pull out distance? Right Ans - Four feey
What is the minimum force that a work positioning system anchorage must be
able to withstand? Right Ans - Two times the arresting force of 3000lbs
What minimum force must a non-engineered anchor be able to withstand for
fall protection use? Right Ans - 5,000 lbs
When working, how often should fall protection equipment be inspected ?
Right Ans - Daily before each use
According to the applicable industry standard, what is the minimum height
from a lower surface or ground where fall protection must be used? Right
Ans - Six feet
How many pounds force is one kilo Newton(kN) Right Ans - 225
What are the four most common types of towers used to support
telecommunications antennas? Right Ans - Guyed towers, self-support
towers, monopoles, and non- standard
What identifies a self-support tower? Right Ans - Horizontal member
What is not a component on a guyed tower? Right Ans - Gin pole
What is the purpose of a turnbuckle when working with guy wires? Right
Ans - Adjusts the tension
Which government organization regulates tower lighting ? Right Ans - FAA
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller LeCrae. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.