What is the proper ratio for ladder setup? Right Ans - 4:1
A regulation is a law and is mandated by OSHA, Federal, State or provincial
government. Right Ans - True
ANSI and CSA standards are law and are enforced by a governing body
Right Ans - False
OSHA 1926 Subpart M Fall Protection for the most part excludes the
Telecommunications Industry. Right Ans - True
An Authorized Climber must be evaluated by a Competent Person every how
many years? Right Ans - 1 Year
A refresher Fall Protection course must be taken every how many years?
Right Ans - 2 Years
What is the minimum elevation that requires the use of Fall Protection in
construction? Right Ans - 6 Feet
Working on a rooftop, what can be used like a tether to keep you from being
exposed to a fall? Right Ans - Fall Restraint System
An anchorage for a fall restraint system must be able to withstand a maximum
force of? Right Ans - 1,000 lbs.
The primary fall protection attachment will always be to either the dorsal or
sternum d-ring. Right Ans - True
In most cases one step bolt on a Monopole will always create a 5,000 lb
anchorage. Right Ans - False
Fall protection anchorage must be rated 5,000 lbs, unless it's engineered, then
it's 3,600 lbs. Right Ans - True
, When it is difficult to find an anchorage directly above you, which scenario is a
better option? Right Ans - One that will hold 5,000 lbs even if it results in a
swing fall.
All connecting devices used in fall protection must have a breaking strength of
5,000 lbs Right Ans - True
How many connecting devices should be used in one d-ring at a time? Right
Ans - 1
All snap hooks and carabiners are designed for straight, in-line loading?
Right Ans - True
One kilo newton is equal to how many pounds? Right Ans - 225lbs
Based on ANSI, all latch gates used for fall protection shall be rated for?
Right Ans - 3,600lbs
It's proper to use fall protection that is not manufactured to comply with ANSI
and CSA. Right Ans - False
What's the max distance allowed from the eternal d-ring and the cable slide?
Right Ans - 9 Inches
For hazard analysis, what is the proper sequence for the hierarchy of
controls? Right Ans - Hazard identification, engineering, administrative,
and PPE
Some of the items that you are looking for when inspecting webbing are?
Right Ans - Tears and frays, fading or weak spots, burns
If you are unsure of a piece of equipment, always remember "When in doubt,
Take it out!" Right Ans - True
What is the force that a non-engineered anchor must be capable of supporting
for Fall Protection? Right Ans - 22.2KN or 5,000lbs
The use of a body belt used with a positioning device an acceptable means of
Fall Protection Right Ans - No
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller LeCrae. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.49. You're not tied to anything after your purchase.