100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
TCFP Driver Operator Masterclass Questions and Answers Graded A+ $14.49
Add to cart

Exam (elaborations)

TCFP Driver Operator Masterclass Questions and Answers Graded A+

 7 views  0 purchase
  • Course
  • FIRE APPARATUS DRIVER/OPERATOR - PUMPER
  • Institution
  • FIRE APPARATUS DRIVER/OPERATOR - PUMPER

TCFP Driver Operator Masterclass

Preview 4 out of 74  pages

  • August 26, 2024
  • 74
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • FIRE APPARATUS DRIVER/OPERATOR - PUMPER
  • FIRE APPARATUS DRIVER/OPERATOR - PUMPER
avatar-seller
julianah420
TCFP Driver Operator Masterclass


1. What is the atmospheric pressure at sea level?
A. 3.1417 psi (22 kPa)
B. 7.69 psi (53 kPa)
C. 14.7 psi (101 kPa)
D. 21.3 psi (147 kPa) - answeranswer: C
NFPA 1002: 10.2.1, 10.2.1(A)
Page: 324

2. What liquid is used to measure vacuum due to its density?
A. 2-propanol
B. Glycerol
C. Water
D. Mercury - answeranswer: D
NFPA 1002: 10.2.1, 10.2.1(A)
Page: 324

3. A fire pumper in good condition should be able to develop a vacuum equal to about:
A. 17 inches (391.4 mm Hg).
B. 22 inches (507.8 mm Hg).
C. 27 inches (623.2 mm Hg).
D. 30 inches (692.4 mm Hg). - answeranswer: B
NFPA 1002: 10.2.1, 10.2.1(A)
Page: 324

4. What term refers to the height that a column of water can be lifted in a quantity
considered sufficient to provide reliable fire flow?
A. Positive lift
B. Atmospheric lift
C. Dependable lift
D. Acceptable lift - answeranswer: C
NFPA 1002: 10.2.1, 10.2.1(A)
Page: 325

5. Which term refers to the process of removing air from a fire pump and replacing it
with water?
A. Intake
B. Rotary
C. Venturi
D. Priming - answeranswer: D

,NFPA 1002: 10.2.1, 10.2.1(A)
Page: 325

6. What is the best way to assess the operational readiness of the priming system?
A. Perform a vacuum test
B. Perform a pump test
C. Perform a sprinkler test
D. Perform a hydrant test - answeranswer: A
NFPA 1002: 10.2.1, 10.2.1(A)
Page: 328

7. When a reliable public or private water system is not available, drafting operations,
relay pumping, water shuttles, and nurse tender operations will become the
responsibility of the:
A. tanker officer.
B. pumping officer.
C. water supply officer.
D. drafting officer. - answeranswer: C
NFPA 1002: 10.2.1, 10.2.1(A)
Page: 330

8. What does the "C" stand for in the formula Q=L × W × D × C?
A. Coefficient
B. Calculation
C. Constant
D. Coefficient calculation - answeranswer: C
NFPA 1002: 10.2.1, 10.2.1(A)
Page: 331

10. Using the formula Q =W × D × V × C, calculate the amount of water available in a
stream that is 10 ft (3.05 m) wide and 2 ft (0.61 m) deep. The water is traveling at 15
ft/min (4.57 m/min).
A. 2250 gpm (8520 L/min)
B. 2350 gpm (8896 L/min)
C. 2450 gpm (9275 L/min)
D. 2650 gpm (10,031 L/min) - answeranswer: A
NFPA 1002: 10.2.1, 10.2.1(A)
Page: 331

9. Using the formula Q L × W × D × C, calculate the amount of water available in a pond
that is 100 ft (30.48 m) long, 80 ft (24.38 m) wide, and 4 ft (1.22 m) deep.
A. 24,000 gallons (90,850 L)
B. 240,000 gallons (908,500 L)
C. 2,400,000 gallons (9,085,000 L)
D. 240,240 gallons (909,400 L) - answeranswer: B
NFPA 1002: 10.2.1, 10.2.1(A)

,Page: XX

11. What term refers to the vertical distance from the water level to the center of the fire
pumper?
A. Suction
B. Lift
C. Draft
D. Suspension - answeranswer: B
NFPA 1002: 10.2.1, 10.2.1(A)
Page: 333

12. The first step in establishing a drafting operation is to:
A. place the pump in gear.
B. locate an appropriate water source.
C. inspect the gaskets in the hard suction.
D. assemble the hard suction hose and strainer. - answeranswer: B
NFPA 1002: 10.2.1, 10.2.1(A)
Page: 335

13. Which type of strainer is used for deep water sources in which the driver/operator is
confident the strainer will not contact the bottom of the water source?
A. Floating strainer
B. Pipe strainer
C. Barrel strainer
D. Low-level strainer - answeranswer: C
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 335

14. Which type of strainer is used for clean, shallow water sources?
A. Floating strainer
B. Pipe strainer
C. Barrel strainer
D. Low-level strainer - answeranswer: D
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 335

15. Which type of strainer is designed to operate below the surface scum and above the
weeds, dirt, and silt in the water source?
A. Floating strainer
B. Pipe strainer
C. Barrel strainer
D. Low-level strainer - answeranswer: A
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 336

, 16. Which type of strainer requires 24 inches (0.5 m) of water in all directions around
the strainer?
A. Floating strainer
B. Pipe strainer
C. Barrel strainer
D. Low-level strainer - answeranswer: C
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 336

17. What is the minimum water depth required to draft utilizing low-level and floating
strainers?
A. 12 inches (0.3 m)
B. 24 inches (0.5 m)
C. 36 inches (0.9 m)
D. 48 inches (1.2 m) - answeranswer: B
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 336

19. What term refers to a small-diameter hose that remains in the open position and
continues flowing water during the entire drafting operation?
A. Flow line
B. Attack line
C. Dump line
D. Hard suction line - answeranswer: C
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 340

18. If drafting with a two-staged pump, it is recommended that the pump be in the
___________ stage before beginning any drafting operations.
A. pressure
B. series
C. drafting
D. volume - answeranswer: D
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 340

20. When providing water to the operation for the purpose of master streams from a
static water source, the transfer valve in a two-stage pump should be in the__________
position.
A. pressure
B. volume
C. straight
D. on - answeranswer: B
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 341

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller julianah420. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $14.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

53022 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$14.49
  • (0)
Add to cart
Added