100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Fire Apparatus Driver-Operator - Pumper Module 4 Questions and Answers Fully Solved $16.49   Add to cart

Exam (elaborations)

Fire Apparatus Driver-Operator - Pumper Module 4 Questions and Answers Fully Solved

 6 views  0 purchase
  • Course
  • FIRE APPARATUS DRIVER/OPERATOR - PUMPER
  • Institution
  • FIRE APPARATUS DRIVER/OPERATOR - PUMPER

Fire Apparatus Driver-Operator - Pumper Module 4 Questions and Answers Fully Solved One gallon of water weighs? 8.33 lbs Water freeze and boil temperatures? Freezes: 32° F Boils: 212° F Previous Play Next Rewind 10 seconds Move forward 10 seconds Unmute 0:11 / 0:15 Fu...

[Show more]

Preview 4 out of 43  pages

  • August 27, 2024
  • 43
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • latent heat of
  • FIRE APPARATUS DRIVER/OPERATOR - PUMPER
  • FIRE APPARATUS DRIVER/OPERATOR - PUMPER
avatar-seller
julianah420
Fire Apparatus Driver-Operator - Pumper
Module 4 Questions and Answers Fully
Solved

One gallon of water weighs? - answer8.33 lbs

Water freeze and boil temperatures? - answerFreezes: 32° F
Boils: 212° F

Water expansion ratio at 500° F. - answer1,700 to 1

Law of Specific Heat - answerAbility of any substance to absorb heat. Water is the
standard for measuring specific heat and is given a value of 1.0

Specific heat is measured in British Thermal Unites (BTUs).

Latent Heat of Vaporization - answerThe amount of heat needed to turn a liquid into a
vapor.

It takes one BTU to raise one pound of water 1°, up to 212° F. Once water reaches 212°
F, each pound requires an additional 970 BTUs to convert it to steam.

Knowledge Check 1

1. Most extinguishing agents require less than one BTU to raise their temperature 1° F.

2. This is the heat absorbing capacity of a substance.

3. Water absorbs over 950 additional BTUs going from 212° F to steam.

4. This is the amount of heat needed to turn a liquid into a vapor. - answerLaw of
specific Heat
1&2

Law of Latent Heat of Vaporization
3&4

Heat Absorption - answerSpeed at which water absorbs heat depends upon the amount
of water surface exposed to the heat.

,Example
Fog nozzle flowing at 100 gpm for a room 96x50x10 will fill a room with steam using the
different patterns. - answerStraight Stream: 9 Minutes

Narrow Fog: 6 Minutes

Wide Fog: 1.5 Minutes

Advantages of water as an extinguishing agent - answerCan absorb large amount of
heat before turning to steam

As surface area increases, heat absorption speeds up

Steam occupies 1,700 times its original volume as water

Water is plentiful in most areas.

Disadvantages of water as an extinguish agent - answerHigh surface tension limits its
penetration into dense materials

Incompatible with or reactive to certain fuels and combustible metals

Ice makes roofs and ladders slippery an can make equipment malfunction

Conducts electricity and makes work with energized electrical equipment dangerous.

Knowledge Check 2

1. Water can absorb large amount of heat before turning to steam

2. Water is reactive to certain combustible metals

3. As water's surface area increases, its heat absorption increases

4. Water has a high surface tension - answerAdvantage
1&3

Disadvantage
2&4

Water Pressure - answerColumn of water

one inch (W) x one inch (L) x 12 inches (H) = 0.434 psi

12 inches (W) x 12 inches (L) x 12 inches (H) = 0.434 psi

,one inch (W) x one inch (L) x 24 inches (H) = 0.868 psi

Characteristics of Water Pressure - answerB = Bottom

E = Equal

D = Depth

P = Perpendicular

A = All

D = Density

Characteristics of Water Pressure Definitions - answerBottom = Pressure at the bottom
of a container

Equal = Pressure transmitted to a confined amount of water is transmitted equally in all
directions.

Depth = Pressure of water in an open container is proportional to its depth

Perpendicular = Pressure on an amount of water is perpendicular to any surface it acts
on

All = At any point in the water in a container, pressure is equal in all directions, including
upwards.

Density = Pressure of a liquid in an open container is proportional to the density of the
liquid. The density of a liquid refers to the material's weight compared to that of an equal
quantity of water. Water is given the weight of "one"; other materials are either lighter
(<1) or heavier than water (>1).

Knowledge Check 3

You're presented with a column of water three feet by three feet, with a height of one
foot. The water pressure of this column equals: - answerA. 0.145 psi

B. 0.434 psi (Correct Answer)

C. 0.868 psi

D. 1.302 psi

Knowledge Check 4

, Identify Two characteristics of water pressure - answerA. The pressure on water is
parallel to any surface it acts on.

B. The water in two containers with the same height but different bottoms dimensions
will have the same pressure at the bottom no matter what the shape of the container.
(Correct Answer)

C. Pressure, when transmitted to a confined amount of water, is greatest in the direction
of gravity.

D. In two containers with the same bottom dimensions and both containing water, but
with unequal heights, the pressure of the water at the bottom of each container is still
equal.

E. The pressure of a liquid in an open container is proportional to the density of the
liquid. (Correct Answer)

Types of Pressure - answer1. Atmospheric Pressure (Sea Level 14.7 psi)

2. Head Pressure

3. Static Pressure

4. Flow Pressure

5. Residual Pressure

6. Normal Operating Pressure

PSI at different sea levels - answerSea Level = 14.7 psi
1,000 Feet Above = 14.3 psi
2,000 Feet Above = 13.8 psi
3,000 Feet Above = 13.4 psi
4,000 Feet Above = 12.9 psi
5,000 Feet Above = 12.5 psi
6,000 Feet Above = 12 psi
7,000 Feet Above = 11.5 psi
8,000 Feet Above = 11.1 psi
9,000 Feet Above = 10.6 psi
10,000 Feet Above = 10.1 psi

Type of Pressure Definitions - answerHead Pressures = Forced created by the height of
a water supply above the discharge point. (calculate by dividing height by 2.3)

Static Pressure = Pressure at discharge point without water flowing

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller julianah420. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $16.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

79271 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$16.49
  • (0)
  Add to cart