Exam (elaborations)

Electrician NCCER Exam Questions And Answers All Verified A+ Graded

0 purchase

Course
NCCER Electrical

Institution
NCCER Electrical

Electrician NCCER Exam Questions And Answers All Verified A+ Graded Which article of the NEC covers grounding? - ANS Article 250 What is a dropout plate? - ANS Metal plate with a curved surface for cable to follow as it passes from the tray All of the following are common service volt...

[Show more]

Preview 3 out of 21 pages

View example

Uploaded on August 28, 2024
Number of pages 21
Written in 2024/2025
Type Exam (elaborations)
Contains Questions & answers

electrician nccer

Institution NCCER Electrical
Course NCCER Electrical

Studyclock Member since 2 year 653 documents sold

$12.99

Add to cart

Add to wishlist

100% satisfaction guarantee
Immediately available after payment
Both online and in PDF
No strings attached

Electrician NCCER

Which article of the NEC covers grounding? - ANS Article 250

What is a dropout plate? - ANS Metal plate with a curved surface for cable to follow as it passes from
the tray

K
All of the following are common service voltages in the United States Except: - ANS 372/575 3-Phase,
4-wire

C
What does a GFCI breaker do? - ANS Opens a circuit to prevent operation of an electrical device

What will happen when one or more coils in a winding are grounded? - ANS The motor will

LO
automatically blow fuses

eight incandescent lighting fixtures are to be installed. Each fixture is 120 volts, with a 200-watt lamp
what is the total connected load? - ANS 13.3 Amps
YC
The __________must be grounded in a bussed glutter if use as the main service equipmemt - ANS
Neutral busbar

When wall mounting cable tray, ensure that - ANS The building structure is strong enough to support the
tray system
D

The purpose of sealing cable ends when reels of cable are in storage is ______________ - ANS to keep
moisture from creeping in
U

The outer covering on liquid-tight flexible metal conduit is use for - ANS A moisture seal

A good electrical connection should - ANS Be mechanically and electrically secure
ST

The symbol normally use for duplex - ANS Circle with two parallel lines draw through it

Disconnecting means are covered in - ANS NEC section 110-22

In relation to switches, the term throw refers to the - ANS Number of internal operations that switch can
perform

A 3-phase, 4-wire, 480v service requires ________ current transformers - ANS 3

Services conductors and equipment are covered in - ANS NEC Article 230

,The NEC required that all receptacles installed on 25 amp and 20 amp branch circuits be__________
receptacles - ANS Grounding

The circular mil is based on the - ANS Cross-sectional area of the wire

A transformer with the primary of 400 turns and a secondary of 300 turns has a - ANS Step down turns
ratio of 4:3

Of the termination classes listed below,_____ is the only one that provides a seal against external

K
elements - ANS Class 1

Unless otherwise noted, the calculations in AC circuits ______ values - ANS Rms

C
When the coil turns increased the ________ - ANS Induced voltage is increased

LO
As the temperature surrounding a self regulating heating cable rises, the ________ - ANS Resistance of
the polymeric core increases

The motor type that has the highest starting torque is the _________ motor - ANS Capacitor - start
YC
For a given number of poles, the________ determines the speed of an AC Motor. - ANS Frequency

Both induction and synchronous motor operate on the principle of the rotating________field - ANS
Magnetic

A Transformer has 200 turns in the primary, 150 turns in the secondary, and 120VAC applied to the
D

primary. The voltage across the secondary is - ANS 90 Volts

The output capacity of a motor is rated in - ANS Horsepower
U

The synchronous speed at witcha 4 pole, 60 Hz induction motor operates is ________ rpm - ANS 1800
ST

The sine of 0 degree is - ANS 0

In a AC circuit containing resistance only, _______ 12A will flow if the resistance is 10 ohms and the
voltage is 120V - ANS 12A

The _____ rotor types are generally rugged - ANS Squirrel cage

The componente labeled 7 in figure 1 is a (an) - ANS End seal

Meters used in AC circuits indicate the_______ - ANS Effective

, Proofs tests are made at________ oF the original factory voltage - ANS 60%

Which type of heating cable can not be cut and terminated in the field? - ANS Mineral insulated

The secondary of a CT under load should not be opened because of______ - ANS Induced hight voltage

In a transformer,______ - ANS Electromagnetic induction occurs

When a ground rod is installed, the top of the rod must be positioned _____.grade - ANS Flush with or
below

K
When making offset bends, the two kicks must be made perfectly parallel or the resulting offset will have
a ________ - ANS Crooked bend

C
All of the following types of condulet may be used as a pulling point for conduit that requires a 90 degree
change in direction, except_______ - ANS C

LO
To be effective, a grounding system must limit the voltage on the electrical system and protect it from all
of the following, except ______ - ANS Undervoltage conditions

What is the most common service use in a temporary power panel? - ANS 120/240 volt, 1-phase, 3-wire
YC
What are the 2 most common types of overcurrent protective devices? - ANS Circuit breakers and fuses

What instrument is use to perform an insulation resistance test on a 480 volt motor winding? - ANS
Megohmmeter
D

What is a seal installed in a run of conduit in a class I location? - ANS Prevent the passage of explosive
gases in the conduit
U

Which of the following is the correct formula for OHM's law? - ANS I=E/R

Which of the following testing instruments operated on the current transformer principle - ANS
ST

Clamp-on ammeter

A drowning showing a point A to point B hookup of conductors is called a - ANS Wiring diagram

What does HOA usually mean in a motor control circuit - ANS Hands of automatic

A120/208 Volt feeder consist of an 800 ft run of 500 kcmil aluminum wire in conduit. This feeder has 5%
voltage drop. What will the phase-toPhase voltage be at the load end - ANS 197.60 volts

What is voltage? - ANS electromotive force

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Studyclock. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $12.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

69052 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 15 years now

Start selling

Exam (elaborations)

Electrician NCCER Exam Questions And Answers All Verified A+ Graded

Document information

Subjects

Written for

Seller

Reviews received

Content preview