Boilermaker test questions and Answers (100% pass)
4 views 0 purchase
Course
Boilermaker
Institution
Boilermaker
Boilermaker test questions and Answers (100% pass)
What do you do with a socket that has cracks - Answer️️ -Mark
the socket with yellow paint and discard it immediately
What is the tower man way used for - Answer️️ -To enter the tower
internally
The proper tightening sequence for a fla...
Boilermaker test questions and Answers (100% pass)
What do you do with a socket that has cracks - Answer✔️✔️-Mark
the socket with yellow paint and discard it immediately
What is the tower man way used for - Answer✔️✔️-To enter the tower
internally
The proper tightening sequence for a flange is a _______ pattern -
Answer✔️✔️-Cross bolting
What wrench size do you use on 3/4 stud with heavy hex nuts -
Answer✔️✔️-1-1/4
The fumes produced during welding upon which of the materials
listed below pose a health hazard - Answer✔️✔️-Galvanized , carbon
steel, stainless steel
During the air carbon arc cutting process , jets of compressed air
are used to blow the slag away from the cuts area. Which are the
potential hazards during this process - Answer✔️✔️-Thermal burns,
burning holes in compressed air line, burnt shoes and clothing
When rigging valves , you should rig by the - Answer✔️✔️-Body
Where the hydrostatic testing goes - Answer✔️✔️-Bottom with the
tiny circle and cross in a middle 2
Where is the man way - Answer✔️✔️-You enter in the hole-D
Bonnet bell head - Answer✔️✔️-The very top of the tower -8
When blinding a tower, what is the most preferred placement of the
blinds - Answer✔️✔️-At first flagnge of the tower, at the top of the
tower, the easiest place to install them, or neither
A ring type joint (RTJ) flange would be used in a - Answer✔️✔️-High
pressure pipe work system
When hydro testing process equipment , where should the vent be
located - Answer✔️✔️-At the highest point allowed to relieve air
pressure
What should be done when performing a first line break -
Answer✔️✔️-Break away and down from you
Pass partition - Answer✔️✔️-Line in the middle of the bottom of the
tower - 3
Channel head - Answer✔️✔️-Right side of the tower lower -10
Tubes - Answer✔️✔️-Middle of tower inside - 6
Davit - Answer✔️✔️-Skinny tube on the right side - B
Where are the bubble caps located - Answer✔️✔️-On the tray rings
The use of #9 wire as a socket retainer is permitted - Answer✔️✔️-
False
2
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller SophiaBennett. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $11.49. You're not tied to anything after your purchase.
