CA SMOG CHECK INSPECTOR TRAINING FINAL EXAM 2024/2025
WITH 100% ACCURATE SOLUTIONS
equipped with dual tanks, tanks over 50 gal, vehicles for which no adapter is
available, or have inaccessible canisters, unless the vapor line is accessible. -
Precise Answer ✔✔All vehicles 1976-1995 receive a LPFET, unless
___________.
Idle Test, Crankcase Test, BAR Snap Test - Precise Answer ✔✔What are the three
parts of a "visible smoke test" on a gasoline vehicle?
Automatic transmission in its normal driving gear, manual transmission in second
gear - Precise Answer ✔✔What gear should be used when performing an ASM
emissions test?
Faulty brakes, low oil pressure, large coolant leak, tire failure, gasoline leaks,
engine noise, overheating - Precise Answer ✔✔These items can cause a vehicle to
be rejected from an inspection.
Tire pressure, missing emission label, traction control - Precise Answer ✔✔These
items are not a reason to reject vehicle from an inspection
Stoichiometry - Precise Answer ✔✔What is the term for ideal combustion
efficiency?
Advise the vehicle owner to have the vehicle diagnosed to determine the cause of
the failure - Precise Answer ✔✔If a vehicle fails an inspection for any reason,
what should the technician do?
, Use the VIN on the vehicle and continue with the inspection. - Precise Answer
✔✔If the VIN on the registration and vehicle differ, what action should the
technician take?
Notify the customer both orally and in writing that they are unable to repair if it
fails. - Precise Answer ✔✔If a test and repair station does not have the
tools/equipment to repair a vehicle, what must be done prior to accepting a vehicle
for an inspection.
Location of liquid fuel leak, reason for smoke test failure, E.O. numbers for
aftermarket parts, component which fails in "other" category, monitors not run to
completion, location of inaccessible canister for LPFET. - Precise Answer
✔✔What must be noted on a VIR?
Check for a BAR Referee Label, and continue with the test if equipped. - Precise
Answer ✔✔A vehicle has been converted from diesel to gasoline. All equipment is
installed for the conversion. What action should the inspector take?
Verify the aftermarket parts are approved. - Precise Answer ✔✔What action
should taken be when testing a vehicle with aftermarket parts?
Basic - Precise Answer ✔✔What program area performs only TSI tests on a
biennial basis?
Enhanced - Precise Answer ✔✔What program area performs both TSI & ASM
tests on a biennial basis?
Change of ownership - Precise Answer ✔✔What program area performs only TSI
tests on change of ownership?
WITH 100% ACCURATE SOLUTIONS
equipped with dual tanks, tanks over 50 gal, vehicles for which no adapter is
available, or have inaccessible canisters, unless the vapor line is accessible. -
Precise Answer ✔✔All vehicles 1976-1995 receive a LPFET, unless
___________.
Idle Test, Crankcase Test, BAR Snap Test - Precise Answer ✔✔What are the three
parts of a "visible smoke test" on a gasoline vehicle?
Automatic transmission in its normal driving gear, manual transmission in second
gear - Precise Answer ✔✔What gear should be used when performing an ASM
emissions test?
Faulty brakes, low oil pressure, large coolant leak, tire failure, gasoline leaks,
engine noise, overheating - Precise Answer ✔✔These items can cause a vehicle to
be rejected from an inspection.
Tire pressure, missing emission label, traction control - Precise Answer ✔✔These
items are not a reason to reject vehicle from an inspection
Stoichiometry - Precise Answer ✔✔What is the term for ideal combustion
efficiency?
Advise the vehicle owner to have the vehicle diagnosed to determine the cause of
the failure - Precise Answer ✔✔If a vehicle fails an inspection for any reason,
what should the technician do?
, Use the VIN on the vehicle and continue with the inspection. - Precise Answer
✔✔If the VIN on the registration and vehicle differ, what action should the
technician take?
Notify the customer both orally and in writing that they are unable to repair if it
fails. - Precise Answer ✔✔If a test and repair station does not have the
tools/equipment to repair a vehicle, what must be done prior to accepting a vehicle
for an inspection.
Location of liquid fuel leak, reason for smoke test failure, E.O. numbers for
aftermarket parts, component which fails in "other" category, monitors not run to
completion, location of inaccessible canister for LPFET. - Precise Answer
✔✔What must be noted on a VIR?
Check for a BAR Referee Label, and continue with the test if equipped. - Precise
Answer ✔✔A vehicle has been converted from diesel to gasoline. All equipment is
installed for the conversion. What action should the inspector take?
Verify the aftermarket parts are approved. - Precise Answer ✔✔What action
should taken be when testing a vehicle with aftermarket parts?
Basic - Precise Answer ✔✔What program area performs only TSI tests on a
biennial basis?
Enhanced - Precise Answer ✔✔What program area performs both TSI & ASM
tests on a biennial basis?
Change of ownership - Precise Answer ✔✔What program area performs only TSI
tests on change of ownership?
