ACU Testing 2 With 100% ACCURATE QUESTIONS AND ANSWERS GRADED A+
Terms in this set (30)
Steps:
Open the circle sketch and change diameter to .3125
3D Model tab --> create panel --> sweep figure
Sweep
Go to the Model Browser find the sweep (1st one) and right click to find iProperties and find the
volume (in physical tab)
What is the volume of the resultant feature: 0.165
Steps:
Go to Constraint Panel
Find the insert type (third icon)
Assembly Constratints
Centers of both screws
Inspect --> measure distance from the base to edge of constraint
What is the distance between the head of the bolt and the base of the nut: 0.787
ACU Testing 2
1/6
, Steps:
Annotate tab --> Symbol panel --> center mark icon
Click edge of the big and small circle
Go to the centerline icon
Centerlines drawing
Click the edge of the big circle and drag down to the edge of the small one
Right click to exit
Go to dimensions and take dimension of the angle
What is the acute angle between two of the centerlines: 4
Cannard drawing What is the dimension of the line show in the view: 16.60
Steps: 3D model tab --> Create panel --> rib icon
Click the purple line
Rib Creation Go to the second tab of the pop (called draft) change the angle to 15
Go to model browser and go to iProperties
What is the volume of the part: 14.065
Steps:
Go to modify panel --> hole
Make a counterbore hole (the first icon on the bottom row) on all the specified areas
Change the diameter to 10mm , hole diameter to 5 mm, and termination through all
Attach Plate
For second type of hole, make a countersink hole (3 icon on bottom row) with a C Sink diameter
of 10 mm, hole diameter of 5mm
Go to iProperties to get mass
What is the mass of the part: 1.377
Steps:
Create a new a part A circle with a diameter of 6 and 4 thick.
With new part, go to 3D model --> work features --> axis command and click the outside of the
part
Go to model browser and open xz plane to work on
New Inventor Assembly
Create a rectangle (.25 x .25) in the middle of the part
Make the dimensions from the axis to the edge of the rectangle 2.75
Revolve the sketch while cutting
Find the iProperties
What is the volume of the ring: 111.968
ACU Testing 2
2/6
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Queenstin. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.