Exam (elaborations)
NCCCO STUDY GUIDE TEST QUESTIONS WITH CORRECT ANSWERS
- Course
- Institution
NCCCO STUDY GUIDE TEST QUESTIONS WITH CORRECT ANSWERS
[Show more]
Content preview
NCCCO STUDY GUIDE TESTQUESTIONS WITH CORRECT ANSWERS
Ancillary attachment - answer-devices attached to the crane that perform functions
other than lifting a load with a hook, such as forks, augers, grapples, or a digging bucket
Anti-two block device - answer-a device that prevents two blocking from occurring if
crane is used with load hoist mechanism
Column (mast) *tq - answer-the vertical structure of the crane between the inner(main)
boom and base
Designated person - answer-a person selected or assigned by the employer or
employers representative as being competent to perform specific duties
Extension cylinders - answer-the hydraulic cylinders used to extend and react boom
extensions
Gross capacity - answer-the capacity listed on the cranes load chart
*no deductions
Load radius (abc) *tq - answer-the horizontal distance from the center line of the cranes
rotation to the center of gravity of the load
*articulating boom crane
Load radius (abl) - answer-the horizontal distance from the center of the cranes rotation
to the center of the rotator
*articulating boom loader
Net capacity - answer-the total weight a crane may lift after the load handling
deductions have been subtracted from the gross capacity
*net after deduction
General safely precautions *tq - answer-1. A fire extinguisher (min 5.bc rating) must be
maintained on the crane or vehicle at all times
2. Do not refuel the vehicle while the engine is running
General precautions of control systems :check for the following *tq - answer-1. Control
function labels must be legible
2. Ensure that controls return freely to their neutral position before engaging power
source
3. Ensure that o reload protection (olp) systems have not been compromised
Manual control systems: check for the following - answer-1. Flooring of elevated stand-
up platforms must be made of slip-resistant material
, 2. Elevated stand-up platforms must have designated handholds to access and egress
the platform. Do not use controls to hoses as handholds
3. Tq**** use three-point contact (both feet and one hand, or both hands and one foot)
for access and egress of elevated platforms
Cable and remote controls: check for the following *tq - answer-1. To prevent
unauthorized operation, switch the remote off and remove the key when not in use
2. Never walk backwards when using the remote control
Top set control station *tq - answer-only one person may occupy the operators station
area (except during training)
Ancillary attachments: general precautions *tq - answer-1. Do not exceed the load rating
of the attachment; note that the attachments load rating may bless than the cranes
rating
2. Account for any load handling deductions (ex. Weight of attachments)
3. When using pallet forms. Make sure the fork tines are entered under the load to
balance the load and lift level
4. Do not push down on the lifting attachment with the boom
5. Do not allow lifting attachments to push upward on the boom
6. Never lift personnel lifting device that is approved by the crane manufacturer and is
attached or pinned to the last boom extension
Articulating boom loader a d fork assembly:general precautions *tq - answer-1. Use the
right attachment for materials to be lifted
2. The plastic supports on tieback of the fork must closely fit the load to prevent shifting
and damage the load
3. The load shall rest on the load handling forks evenly and be engaged in a manner
that places the load center of gravity directly on or between the forks
4. The swivel fork must always be able to float freely and never allow the fork or load to
rest against the crane boom
Articulating boom loader and fork assembly: safety precautions *tq - answer-1. Test the
fork control functions prior to use improper rotation or accidental opening of form tines
may cause the loss of a load
2. To maintain stability, keep the load as close to the ground and as short a radius as
practical
3. During transport, the fork assembly must be stowed and secured on the vehicle on
such a manner that it cannon swing out
4. Overloading the fork assembly could cause the form assembly to open uncontrollably
5. When handling drywall, close the fork as soon as the los clears the truck bed or
ground surface
6. The transport of persons is prohibited using a fork assembly attachment under any
conditions- no riders on forks or load
7. When practical, the load should be clamped between tines and backrest of the fork
assembly
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller biggdreamer. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $14.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
73091 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now