100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Industrial Refrigeration Exam Questions with Correct Answers $16.49   Add to cart

Exam (elaborations)

Industrial Refrigeration Exam Questions with Correct Answers

 7 views  0 purchase
  • Course
  • Refrigeration machine operator
  • Institution
  • Refrigeration Machine Operator

As defined in chapter 1 of this text the primary purpose of refrigeration system is - Answer-To maintain a temperature Operators must keep refrigeration systems operating safely and efficiently. Which of the following best describes the areas of required knowledge for this to be possible. - Answ...

[Show more]

Preview 3 out of 20  pages

  • September 9, 2024
  • 20
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • Refrigeration machine operator
  • Refrigeration machine operator
avatar-seller
lectknancy
Industrial Refrigeration Exam Questions
with Correct Answers
As defined in chapter 1 of this text the primary purpose of refrigeration system is -
Answer-To maintain a temperature

Operators must keep refrigeration systems operating safely and efficiently. Which of the
following best describes the areas of required knowledge for this to be possible. -
Answer-Basic physical principles, Inter-preparation of information from temperature and
pressure gauges. Basic operating principles.

Mechanical refrigeration is a series of steps that - Answer-moves heat energy from the
space or object to an area where It can do no harm.

Heat energy always flows - Answer-From an object at a higher temperature to an object
at a lower temperature

sensible heat - Answer-Is heat energy that causes a change in temperature but does
not cause a change of state

Latent heat - Answer-Is heat energy that causes a change of state but does not cause a
change in temperature

Which of the answers below is an example of heat transfer by convection - Answer-
Warm air moving over an object

How does the refrigeration technician/operator know what the conditions are within the
refrigeration system - Answer-By using his knowledge of system basic operating
principles to evaluate temperature and pressure readings

How was cooling accomplished by mechanical refrigeration system - Answer-By
removing heat energy from one object or area

Which of the following is used to measure the quality of heat energy - Answer-British
thermal units BTUs or calories.

Which of the following are used in heat calculations - Answer-Mass, latent heat,
temperature, specific heat.

Latent heat of vaporization - Answer-Is the heat energy required to cause a liquid to
become a vapor

Pressure is A measure of - Answer-The relationship of a force being applied over a
given area

,The relationship between temperature difference in heat flow is - Answer-The greater
the temperature difference the more rapid the heat flows

Specific heat - Answer-Is greater as a substance requires more heat energy to increase
temperature

Temperature is a measure of - Answer-The intensity of heat energy in an object

Which of the answers below is an example of heat transferred by conduction - Answer-
A rod heated on one end and becoming warm at the other end.

Which are the two most common forms of heat transfer in refrigeration - Answer-
Conduction and convection

The condition of a boiling liquid is - Answer-Saturated

A vapor cannot be - Answer-Subcooled

What kind of measure is a ton of refrigeration - Answer-A rate of heat transferred in
BTUs per unit of time

The condition of a liquid that exist at a temperature below its boiling point is - Answer-
Sub cooled

Which does the refrigerant in the condenser change State from vapor to a liquid -
Answer-The refrigerant loses heat energy to the sub rounding environment

The expansion valve controls only one of its items below which is it - Answer-The flow
of liquid into the evaporator

Flash gas is - Answer-Only the gas created at the expansion device

Which is a example of pressure drop - Answer-The loss of pressure as a fluid moves
down the pipe due to the interaction of the fluid in the inner walls of the pipe

Refrigerant absorbs the most heat when - Answer-Changing from a liquid to a vapor

The latent heat of condensation of a substance is exactly the same quality as - Answer-
The latent heat of evaporation of the substance

Saturated conditions exist - Answer-At some point within an evaporator and condenser

Flash gas - Answer-Is formed after the point of expansion

, The four necessary components of a mechanical refrigeration system are - Answer-
Expansion device, evaporator, compressor, condenser

A conventional mechanical refrigeration system is considered - Answer-A closed loop
system

Super heat is found at which point of a typical system - Answer-The compressor suction
and compressor discharge line

In an operating ammonia refrigeration system, subcooled refrigerant can only be a -
Answer-Liquid

Superheated refrigerant can only be a - Answer-Vapor

Saturated refrigerant can - Answer-Be a liquid, vapor or a combination of the two

What is needed to get a fluid to flow - Answer-A pressure difference

What is one advantage to having evaporator pressures higher than atmospheric
pressure - Answer-Higher pressures keep air out of the system

R 507 is a/an - Answer-Azeotrope

what do you multiply times the mass flow rate to determine the vapor flow rate through
the compressor - Answer-Specific volume cubic feet/lb

Three factors to consider when choosing a refrigerant - Answer-Cost, availability, and
safety

According to this text, trapped ammonia liquid results and how much pressure change?
- Answer-100 to 150 PSI per degree Fahrenheit increase

One positive characteristic of halocarbon refrigerants is - Answer-They are usually not
explosive

A slight leak in a fitting on a HCFC/22 system causes the Halide torch flame to -
Answer-Turn green

If the reciprocating Systems evaporator temperature is decreased, what happens to the
compressor theoretical discharge temperature? - Answer-Discharge temperature rises

Which refrigerant requires the largest compressor displacement per ton? - Answer-R-
134a

Which is not a direct symptom of air in an ammonia system - Answer-Decreased
evaporating temperature

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller lectknancy. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $16.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

79271 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$16.49
  • (0)
  Add to cart