COMMERCIAL SEPTIC SYSTEM INSTALLER EXAM |GUARANTEED PASS |2024.2025
4 views 0 purchase
Course
Commercial Septic System Installer
Institution
Commercial Septic System Installer
All tanks must have: - ACCURATE ANSWERS 2 compartments
All tanks whether pre-manufactured or constructed on site shall be constructed so that the length is ___________ compared to the width. - ACCURATE ANSWERS at least one and one- half (1 1/2) times... "to the width."
Septic Tanks may be mad...
COMMERCIAL SEPTIC SYSTEM
INSTALLER EXAM |GUARANTEED
PASS |2024.2025
All tanks must have: - ACCURATE ANSWERS✔✔ 2
compartments
All tanks whether pre-manufactured or constructed on site shall
be constructed so that the length is ___________ compared to
the width. - ACCURATE ANSWERS✔✔ at least one and one-
half (1 1/2) times... "to the width."
Septic Tanks may be made of: - ACCURATE ANSWERS✔✔
Concrete, Plastic, fiberglass, or other materials as approved by
the department.
Tank compartment partitions will be located: - ACCURATE
ANSWERS✔✔ Not less than two-thirds or more than three-
fourths the Length of the tank from the Inlet end.
Compartment partitions will be constructed so a pass-thru hole
or slot equal to or greater than the diameter of the inlet pipe is
positioned below the liquid surface with a
_____________________________. - ACCURATE
, ANSWERS✔✔ Minimum 25% to a maximum of 50% of the
total liquid depth.
Total liquid depth for larger poured-in-place tanks shall have a
maximum of ______________inches - ACCURATE
ANSWERS✔✔ 66 inches
True or False: Walls and bottom of poured-in-place septic tanks
must be reinforced. - ACCURATE ANSWERS✔✔ True
How can a Septic tank be reinforced? - ACCURATE
ANSWERS✔✔ six inch by 6 inch (6"x6") No.10 gage welded
steel reinforcing wire OR fibrous reinforcing material
conforming to ASTM specifications for such materials.
How must Tank Lids be Reinforced? - ACCURATE
ANSWERS✔✔ using three-eights steel reinforcing rods (rebar)
which shall be spaced twelve inches (12") on center each way
extending a minimum of two and one half (2 1/2") inches and a
maximum of three (3") from the outside edge of the tank lid.
In general, the tank must be able to withstand a uniform live
load of ______________________ pounds per square foot in
addition to all loads to which an underground tank is normally
subjected. - ACCURATE ANSWERS✔✔ 150
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller EXAMLINKS. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.49. You're not tied to anything after your purchase.
