ASE G1 Exam Questions and Answers 100% Pass | Guaranteed Success
2 views 0 purchase
Course
ASE
Institution
ASE
ASE G1 Exam Questions and Answers
100% Pass | Guaranteed Success
Coolant should be tested for - a. Proper color
b. Freezing point (temperature)
c. Specific gravity
*d. Both b and c
Two technicians are discussing a compression test. Technician A says that
the engine
should be cranked over wi...
Two technicians are discussing a compression test. Technician A says that
the engine
should be cranked over with the pressure gauge installed for "4 puffs."
Technician B says
that the maximum difference between the highest-reading cylinder and the
lowest-reading
cylinder should be 20%. Which technician is correct? - ✔✔a. Technician A
only
b. Technician B only
*c. Both Technicians A and B
d. Neither Technician A nor B
,Technician A says that oil should be squirted into all of the cylinders before
taking a
compression test. Technician B says that if the compression greatly
increases when some oil
is squirted into the cylinders, it indicates defective or worn piston rings.
Which technician is
correct? - ✔✔a. Technician A only
*b. Technician B only
c. Both Technicians A and B
d. Neither Technician A nor B
During a cylinder leakage (leak-down) test, air is noticed coming out of the
oil fill opening.
Technician A says that the oil filter may be clogged. Technician B says that
the piston rings may be worn or defective. Which technician is correct? -
✔✔a. Technician A only
*b. Technician B only
c. Both Technicians A and B
d. Neither Technician A nor B
Leaking antifreeze can be what color? - ✔✔a. Green
b. Orange
, c. Red
*d. Any of the above
What precautions are needed to be performed to help prevent air from
getting trapped in
the cooling system when replacing coolant? - ✔✔a. Use the proper
antifreeze as specified
*b. Open bleeder valve(s) during filling
c. Use premixed coolant
d. Wear protective gloves
When replacing a water pump, be sure to - ✔✔a. Torque all fasteners to
factory specifications
b. Use a new gasket/ seal
c. Check that the accessory drive belt is properly aligned and adjusted to
the proper
tension
*d. All of the above
When using a scan tool to retrieve diagnostic trouble codes (DTCs), the
technician should
also - ✔✔a. Check monitor status
b. Check freeze frame data
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller JOSHCLAY. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.
