100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Power engineering 5th class final exam questions and answers $14.49   Add to cart

Exam (elaborations)

Power engineering 5th class final exam questions and answers

 1 view  0 purchase
  • Course
  • Power Engineering 5th Class
  • Institution
  • Power Engineering 5th Class

Power engineering 5th class final exam questions and answers

Preview 3 out of 23  pages

  • September 18, 2024
  • 23
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • Power Engineering 5th Class
  • Power Engineering 5th Class
avatar-seller
GUARANTEEDSUCCESS
5th Class Power Engineering
Assignment 3 questions and
answers
Explain the conditions required and actions that must be attempted
before a boiler start up can be attempted - answer Make sure the
boiler has a valid inspection certificate, make sure no foreign
matter, such as tools or rags, is left behind, clean the boiler
chemically, make sure the firing equipment is ready for startup


Describe the automatic start-up sequence of a gas fired boiler fitted
with a draft fan or blower. Also describe how the boiler is warmed
up after starting from cold - answer On gas-fired boilers with a
standing pilot, open the pilot valve and light the the pilot. Follow
the lightning instructions given on the instruction plate attached to
the burner mandifold or automatic valve. When the pilot is lit and
burning satisfactorily, open the stop valve in the fuel line to the
main burner. It's warmed up from cold to warm slowly to prevent
uneven expansion and thermal shock


Describe the automatic shutdown sequence of a gas fired boiler -
answer Reset all limit switches, such as low water, which would
have been tripped or opened during shut down, check the boiler
control switch is in the off position


List three reasons why ignition may not occur during the startup
sequence of a boiler and explain each - answer Flame scanners if
they don't detect the fire in your furnace the boiler will cut off gas
supply. Broken electrode will cause the pilot not to light at all.
Faulty pilot ignition cable if your boiler does not seem to be
attempting to ignite, check to ensure it has any power, and if not,
inspect the fuse box to see if any fuse has tripped

,Describe two reasons why a high/ low fire burner might stay on low
fire - answer The modulating control may be malfunctioning, the
igniter is defective


Describe four reasons why a burner shutdown may occur during
firing - answer Too much air in the system, excessively high boiler
firing rate, opening burner fuel valves before ignition is established,
purging the furnace before light-off


Explain step by step, the general preparations required for starting
up a hot water heating boiler after a lengthy shut-down - answer
Heat up a cold boiler slowly as to avoid thermal shock and uneven
expansion, because this leads to boiler leakage and costly repairs.
Should any abnormal condition occur immediately shut down the
boiler and close the stop valves in the fuel lines. Identify the
problem before restarting the boiler.


Describe how would you start up of a hot water boiler with a
standing pilot - answer First set the gas valve to the pilot. Position
hold down the bypass button to let gas into pilot. Keep holding the
button down and use a lighter to insert a flame over the pilot


Describe two conditions that, while appearing abnormal, will
disappear after a hot water heating boiler heats up - answer 1.
Slight Smoking- When a cold- fired boiler is started up, the operator
may notice that during the first part of the warm-up period to the
stack will smoke slightly. This is normal since the furnace
temperature is not enough yet to vaporize the incoming fuel oil
immediately and completely. If the stack is smoking heavily and the
burner nozzle is known to be clean, adjust the air damper to obtain
the proper fuel- air ratio.
2. condensation- When a cold gas fired boiler is started up,
condensation will run out of the drain in the colour of the reversing
chamber


Describe the cause of uneven expansion and what the effects of
uneven expansion are - answer When the burner is lit in a cold fire

, tube boiler, the furnace and the first pass of the fire tubes will heat
up rapidly. This heat is not readily carried off by the water
surrounding the tubes since proper circulation has not been
established and as a result, the metal temperature will rise
considerably. In hot water boiler with forced circulation, the metal
temperature will not rise to the same extent.


Define "thermal Shock" - answer When metal is subjected to a
sudden change in temperature, the temperature change will not be
even throughout the metal. Expansion and contraction will not be
equal in all parts of the metal. This causes strong internal stresses
in the metal, called "thermal shock"


Explain the problems which may arise by operating a gas-fired hot
water heating boiler below a temperature of 77 C (170F) - answer
Are avoided to prevent flue gas condensation


What is the recommended operating pressure of hot water heating
system that has a safety relief valve set to 827 Kpa (120 psi) -
answer The operating pressure should not exceed 620 kpa (90 psi).
The reason for this recommendation is that a large pressure
differential will assure tight closing of the valve


State the advantage of having a stack thermometer - answer To
check the temperature of the flue gases


Explain the importance of maintaining up to date records of boiler
stack temperatures during normal operations plant operation. -
answer By keeping a log of the stack temperature, a gradual
increase in temperature will tell the operator that the heating
surfaces are fouling up and that the heat transfer, and thus the
boiler efficiency, is dropping. Cleaning may be required


Describe the results of excessive scale and soot in a boiler - answer
Spot deposits on the fireside caused by improper combustion or

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller GUARANTEEDSUCCESS. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $14.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

64438 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$14.49
  • (0)
  Add to cart