Ammo-28-DL Electrical Explosives
Safety for Army Facilities, Ammo-47-DL
Lightning Protection for Air Force
Facilities
Which statement regarding lightning protection is false? ANS - lightning protection system prevents
lightning strikes from occurring.
How many down conductors are required for a mast LPS? ANS - 2
Which material is preferred for ground conductors? ANS - Copper
What does n represent in the Basic Bonding Formula? ANS - Number of down conductors
What does Km represent in the Basic Bonding Formula? ANS - flashover medium
During an LPS inspection you notice a grounded metal pipe 3 feet from a conductor. Should you write it
up as a possible discrepancy? ANS - Yes. Grounded metal objects within 6 feet of a conductor should be
considered for bonding
What does D represent in the Basic Bonding Formula? ANS - Bonding distance
Which bonding condition applies to isolated metal objects surrounded by non-conductive material (such
as a metal door frame in a concrete wall)? ANS - WRONG Condition 2
Calculate the BBF to determine if bonding is required for the scenario below. Use a calculator, the BBF
equation aid, and the bonding job aid as required.
• The metal vent is 15 feet high.
• There are 2 down conductors at the proper spacing.
, • The vent is 12 inches (1 foot) from a conductor through air. ANS - Bonding distance for the metal roof
vent is 1 foot 8 inches. Bonding is required.
LPS test results must be kept on file for ANS - 6 inspection cycles
An LPS visual inspection is required every ANS - 12 months
Conductive floors in explosives facilities must be tested every ANS - WRONG 6 months
At a minimum, how many individual resistance tests must be performed on this conductive floor? Refer
to DA PAM 385-64, Section C-3 as required. ANS - Ten tests: five electrode-to-electrode and five
electrode-to-ground tests
An LPS requires three-point fall-of-potential earth resistance testing every ANS - Every 24 months
When conducting a 3-point fall-of-potential earth resistance test, what is the maximum allowable
resistance reading? ANS - 25 ohms
When conducting a bonding resistance test, what is the maximum allowable reading? ANS - 1 ohm
How many individual bonding resistance tests are required on an integral LPS with 12 air terminals and 2
down conductors? ANS - 24
Which storm warning system measures the strength of atmospheric electric fields and warns of the
possibility of lightning strikes? ANS - Pre-strike
Which hazardous classified location division poses the least probability of ignition or explosion? ANS -
Division 2
Which material belongs to hazardous classified location Class II? ANS - coal dust
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Professorkaylee. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.49. You're not tied to anything after your purchase.