WRT Certification Test Questions and
Complete Solutions Graded A+
What is the most important aspect to the beginning of a job? - Answer: Risk/Hazard assessment for the
safety of all individuals involved
Employers must provide training, a fit test, and a medical evaluation for employees who will be utilizing
what equipment? - Answer: Respirator and cartridges
What should be completed before starting emergency mitigation services? - Answer: A work
authorization (contract) has been signed.
Often found in older structures, lead and asbestos are hazardous materials regulated by the federal
government. - Answer: True
Water that has a significant degree of contamination and could cause illness is which of these? - Answer:
Category 2
Water that is grossly contaminated - Answer: Category 3
If stopped from removing highly porous materials (carpet) on a Category 3 job, what should the restorer
do? - Answer: Stop work to prevent liability
Secondary damage is more likely to occur when relative humidity levels are - Answer: 65%
When a water loss occurs, the most important factor in reducing damage is - Answer: Rapid response to
start mitigation procedures
What steps should be taken when working in an area with potential contamination? - Answer: Wear
proper PPE, contain the area
, Which of the following would be considered category 1 water?
- is grossly contaminated
- from a sanitary source
- has significant contamination
- contains regulated materials - Answer: From a sanitary source
Performing a thorough extraction or repeated extractions accomplishes what? - Answer: reduces drying
times
Water extracted from a jobsite should be - Answer: disposed of according to local laws
In a crawlspaces that measures 37' x 42' and has water standing at a depth of 1' 9", how many total
gallons are there? - Answer: 20,341 gallons
A moisture reading obtained from an unaffected material that allows the restorer to set drying goals for
the affected structure - Answer: Dry standard
When is a drying job done? - Answer: a moisture meter indicates we have met our dry goal
The moisture sensor can be used to verify our drying goal has been met - Answer: false
Moisture sensors and IR camera are effective tools for - Answer: quickly locating moisture in carpet
What does a thermo-hygrometer measure? - Answer: Temperature and relative humidity
Why do IR infarred cameras indicate possible moisture in materials? - Answer: Materials surface
temperature cools as water evaporates
Once an area is identified with an infared camera as a suspect of being wet, that area must be verified
with - Answer: A thermal hygrometer???
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller YourExamplug. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $14.49. You're not tied to anything after your purchase.