Exam (elaborations)
API 570 TEST QUESTIONS AND ANSWERS
- Course
- Institution
API 570 TEST QUESTIONS AND ANSWERS
[Show more]
Content preview
API 570 TEST QUESTIONS AND ANSWERSSection 1 - Scope
1-Which of the following activities is NOT included in the scope of API 570? - Answers -
Operating a pipe system
2-Which of the following activities is NOT included in the scope of API 570? - Answers -
Performing pipe fabrication
3-API 570 pertains to: - Answers -Only to metallic and FRP pipe
4-API 570 pertains only to: - Answers -Pipe and their associated relief devices
5-The inspector discovers a problem on a pipe that requires corrective action. Who is
responsible to respond to this issue? - Answers -Owner/User
6-API 570 is used: - Answers -By petro-chemical facilities
7-API 570 takes effect: - Answers -Once the pipe is places in service
8-Companies that use API 570 must: - Answers -Either employ or have access to an
authorized inspection agency
9-During a piping repair, if there is a conflict between the requirements of API 570 and
the construction code, which should be followed? - Answers -API 570
10-Duringa piping alteration, if there is a conflict between the requirements of API 570
and the construction code, which should be followed? - Answers -API 570
11-An in-service pipe in being repaired or altered. If there is a conflict between the
requirements of API 570 and the legal jurisdiction, which should be followed? - Answers
-The most stringent requirements
12-An in-service piping system is inspected. If there is a conflict between the
requirements of API 570 and the legal jurisdiction, which should be followed? - Answers
-The most stringent requirements
13-The requirements of API 570 are considered optional for which of the following
piping systems? - Answers -300 psig steam system
14-The requirements of API 570 are considered optional for which of the following
piping systems? - Answers -Category D piping
15-Which of the following chemical plant piping is NOT included in the scope of API
570? - Answers -4 NPS low-density polyethylene pipe
,16-Which code is used for Fitness for Service evaluations? - Answers -API 579
17-Which code is used for RBI evaluations? - Answers -API 580
Section 2
1-During an in-service internal inspection, a crack is discovered on a longitudinal weld.
This crack can be evaluated to which code? - Answers -API 579
2-Which code provides requirements for hot tapping? - Answers -API 2201
3-Which publication provides information on corrosion mechanisms? - Answers -API
571
4-Which publication is used for RBI assessments? - Answers -API 580
5-Which recommended practice is used for guidance in inspecting and testing valves? -
Answers -API 578
**6-Which document can be used when determining soil resistivity? - Answers -ASTM
G57
**7-Which document can provide more information on Injectionmand Mixing points? -
Answers -NACE RP 34101
Section 3
1-Which of the following is considered a piping alteration? - Answers -Replacement 4
NPS portion of a line with a 6 NPS section
2-An alteration on a piping system is defined as: - Answers -Any physical change with
design implications
3-Which of the following inspection organizations is NOT considered an acceptable API
570 Authorized Inspection Agency? - Answers -Piping fabricator
4-Which of the following is considered an API 570 Authorized Inspection Agency? -
Answers -The inspection organization of the jurisdiction
5-A CML is: - Answers -A point or plane through the pipe
6-A critical check valve is one that: - Answers -Could cause a hazardous event (like
Boom!) if it fails
7-A defect is defined as: - Answers -A discontinuity that exceeds the applicable code's
criteria
8-What is maximum diameter of an examination point on an 8 NPS line? - Answers -2"
, 9-What is maximum diameter of an examination point on a 12 NPS line? - Answers -3"
10-An imperfection is: - Answers -Defined as a flaw
11-An indication is: - Answers -A response from an NDE examine
12-An injection point does NOT include: - Answers -Process mix points
13-What is an integrity operating envelope? - Answers -Key process limits that are set
because of a potential degradation mechanism
14-What is management of change? - Answers -Term used to describe a documented
system to review process changes
15-What is a mixing point? - Answers -A piping component that combines two process
streams of differing composition
16-Off-site piping is: - Answers -Piping in a plant that us not in a process unit
17-A piping circuit: - Answers -Is piping of similar metallurgy that is exposed to same
process envoirment
18-The purpose of PMI is to determine: - Answers -That piping components are
specified materials
19-Pressure design thickness: - Answers -Considers only design pressure and design
pressure and design temperature
20-A piping repair is defined as: - Answers -The work necessary to restore a piping
system to a suitable safe condition
21-A propane 4 NPS line has experience damage by CUI. About 150 ft will be replaced
during the next turnaround. Which of the following is true? - Answers -This work is
considered a repair
22-Which of the following inspection oranizations is NOT considered an acceptable API
570 Repair Organization? - Answers -The governing jurisdiction based on the location
of the piping system
23-Which of the following is NOT considered a piping rerate? - Answers -Increased the
fluid viscosity
24-Secondary process piping is defined as pipe that is: - Answers -Downstream of
normally closed block valves
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller GEEKA. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
78861 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now